Other

Filter by
Price
Manufacturers
Filter
Obrázek Obrázek 2
  • -0.12 €
Klima offers 8/7 mm guiding tubes with a length of 76 mm, 6 pcs in a package to guide the racket along the starting bar. Tube weight 0.7 g.
Obrázek Obrázek 2
  • -0.31 €
Last items in stock
Estes - Pro Serie II circlips are designed for mounting the motor on a reduction tube in the tubes of large missiles. The ring with the external thread is glued to the pipe with the outer dia. 29mm. I
Obrázek Obrázek 2
Last items in stock
Other

Pilot 1: 6 Jet blue

Ripmax
RF-RMX530B
The pilot measures 69 x 80 x 42 mm and weighs 28.5 g.
Obrázek Obrázek 2
  • -0.23 €
Last items in stock
Other

Estes spacer rings BT5-BT55 (26pcs)

Estes
RD-ES3175
The set of Estes spacer rings is for BT-5 rocket tubes with an inner diameter of 13.2 mm - BT-55 with an inner diameter of 32.6 mm. Contains rings 25x32x8mm - 4pcs, 14x24x4.5mm - 4pcs, 19x24 w 28mm -
Obrázek Obrázek 2
  • -1.34 €
Last items in stock
Other

Estes altimeter

Estes
RD-ES2246
The altimeter for measuring the flight altitude of the missiles measures up to 3000 meters, 4-digit display measures in metric and inch values, weight 12g, contains an alkaline battery. It measures up
Obrázek Obrázek 2
  • -0.71 €
Last items in stock
Other

Estes AltiTrak altitude meter

Estes
RD-ES2232
Orientation tool Estes AltiTrak altitude meter is used to measure the achieved height of the rocket. Press the trigger when the rocket reaches its highest height and read the measured value.
Obrázek Obrázek 2
  • -0.59 €
Last items in stock
Reduction in tubes of rocket models - Estes - Inserts plastic clear set (3 x 3), dimensions BT-20 with a diameter of 18 / 18.7 mm, BT-50 with a diameter of 24.1 / 24.8 mm and BT-60 with a diameter of
Obrázek Obrázek 2
  • -0.43 €
Last items in stock
Klima Partition for installation in a pipe with an internal diameter of 188 mm, with a screw with an eye, washers and a self-locking nut. Width 10 mm, weight 105 g.
Obrázek Obrázek 2
  • -0.43 €
Last items in stock
Other

Estes Pipe Marking Tool

Estes
RD-ES2227
Estes - The pipe marking tool is designed to facilitate installation work with stabilizers. Exactly in the axis of the tube, the position of the stabilizers is marked, and by means of the device it st
Obrázek Obrázek 2
  • -0.43 €
Last items in stock
Other

Estes pipe cutting agent

Estes
RD-ES2315
Estes - Pipe cutting tool is for precise shortening and perpendicular cutting of the pipe. With pipe rings BT5 (inner diameter 13.2 mm / outer 13 mm), BT20 (inner diameter 18 mm / outer 18.7 mm), BT50
Obrázek
  • -0.43 €
Last items in stock
Other

Estes stickers (water)

Estes
RD-ES3170
Estes - Stickers (water) are an integral accessory of every space rocket model. Complete the look of the rockets exactly according to your ideas with a set of stickers.
Obrázek Obrázek 2
  • -0.40 €
Last items in stock
Other

Estes Ultimate pipe marking product

Estes
RD-ES2228
Estes - Ultimate Pipe Marker will help accurately draw the tube of a rocket model to set up stabilizers. Suitable for all rocket diameters. 450 mm long.
Obrázek Obrázek 2
  • -0.35 €
Last items in stock
Other

Climate partition 190mm

Klima
KL-8516
Klima Partition for installation in a pipe with an inner diameter of 190 mm, width 10 mm, weight 95 g.
Obrázek
  • -0.35 €
Last items in stock
Other

Estes AltiTrak Mini height meter (3)

Estes
RD-ES2226
Estes AltiTrak Mini altitude gauge is used for approximate measurement of the achieved rocket height. Follow the trajectory of the rocket and release the trigger at its highest point. Based on the mea
Obrázek Obrázek 2
  • -0.32 €
Last items in stock
Estes - Pro Series II parachute ejection seal, used for safe ejection of the return device from the rocket model (in a package of approximately 225 pieces. ). For 10-12 launches of Pro Series II rockets.
Obrázek Obrázek 2
  • -0.32 €
Last items in stock
Other

E-flite rocket with streamer (4)

E-Flite
EFLA530
E-flite rocket with streamer (4 pcs)
Obrázek Obrázek 2
  • -0.31 €
Last items in stock
The Klima Guide Slider for the 5 mm rail (2) is attached to the rocket body and slides into the Klima Launch Rail 1500 mm, which is used to launch large rockets. It can also be used with other rails that have a 5 mm groove. A good quality glue is...
Obrázek Obrázek 2
  • -0.32 €
Last items in stock
Klima Partition for installation in a pipe with an internal diameter of 134 mm, with a screw with an eye, washers and a self-locking nut. Width 8 mm, weight 60 g.
Obrázek Obrázek 2
  • -0.31 €
Last items in stock
Other

Estes racket stand

Estes
RD-ES2293
A practical stand for Estes rackets. Suitable as a holder during construction or for displaying a model rocket. Easy to assemble. You can use it in the field when preparing larger rockets for launch.
Obrázek Obrázek 2
  • -0.28 €
Last items in stock
Other

Estes rocket stand (mini engine)

Estes
RD-ES2290
The Estes rocket stand is used to store the rocket (with BT5 tube with an inner diameter of 13.2 mm / outer 13 mm).
Obrázek Obrázek 2
  • -0.28 €
Last items in stock
Estes - Rocket Stands for C11 / D / E, BT50 (24.1 / 24.8) engines are used to store the missile.
Obrázek Obrázek 2
  • -0.28 €
Last items in stock
Estes adapters are carved ring templates for BT-5 rocket tubes (inner diameter 13.2 mm, outer 13.8 mm) - BT-60 (inner diameter 40.5 mm, outer 42 mm).
Obrázek Obrázek 2
  • -0.28 €
Last items in stock
The kit Klima Motor holder has 5 pieces of tube with a length of 75 mm and a diameter of 18 mm. It is intended for larger rockets with a diameter of 75 mm with five 18 mm rocket motors, the rings have a diameter of 72.4 mm.
Obrázek Obrázek 2
  • -0.28 €
Last items in stock
Climate The ejection chamber of 75 mm can protect the parachute during ejection. This is achieved by deflecting hot gases and particles. In the labyrinth of the so-called "Deflector", these gases are retained, while the overpressure fires the return...