SKY RC NC2500 For charger 6x AA/AAA Art. NiMH/NiCd

Multifunctional six-channel charger/discharger ensuring complete and really comfortable care for your AA (pencil) and AAA (micropencil) NiCd and NiMH batteries. The charger's intelligent programs take care of your batteries from initial forming with a small current, through regular charging or discharging to testing voltage, internal resistance and reviving cells that have been operated for a long time or, conversely, stored for a long time. The NC2500 Pro is additionally equipped with a power/charge USB output supporting the QC3.0 protocol and an output for running in DC electric motors. The charger set also includes a mains power supply.

Charging: The NC 2500 Pro allows you to simultaneously charge, discharge, shape or revive up to six pencil or micro-pencil batteries. The parameters of the ongoing process (charge/discharge current, charged/discharged charge, battery voltage, elapsed time) are continuously displayed for all channels on the LCD display. LED indicators for each channel indicate a good contact of the inserted cell and the operating mode of discharging or charging. The operation of the NC2500 Pro channels is synchronous - just insert 1-6 accumulators of the same type, enter the charging parameters or another operating mode, and then with one push of a button start the same process for all "occupied" channels. (If you require the ability to use a different charge/discharge program in each channel, choose the Sky RC NC2200 charger.) When charging, the NC2500 Pro also takes into account the internal resistance of the cells - if it is too high, it automatically limits the charging current to prevent them from overheating. You can also choose a special step-by-step charging mode - this allows you to set the charging process in three steps with different charging currents that switch when the set value of the supplied charge is reached. You can, for example, set a gentler charging process with the current decreasing depending on the supplied charge and thus extend the life of your accumulator.

USB QC3.0: NC2500 Pro charger supports QC3.0 charging protocol (5V/3A ...9V/2A, maximum output power is 18W). Charging will start as soon as you plug your device into the QC3.0 USB port; you can monitor the output voltage, charging current, output power, delivered electric charge and charging time on the display.

Running-in of DC electric motors: The running-in output allows gentle running-in of DC electric motors (so that the carbons perfectly adapt to the commutator) under controlled conditions: you can set the voltage (0.5-6.0 V), current limit (0.1-2.0 A) , the direction of motor rotation and the run-in time. You can charge the batteries at the same time as the run-in.

The NC2500 Pro's USB-C port allows the charger's firmware to be updated.

The operation of the charger and the use of your batteries will be facilitated by a detailed manual describing the principles of proper charging and operation of NiMH and NiCd batteries.

Basic functions

• Input supply voltage 100-240 V/50-60 Hz mains supply
• Input supply voltage 12 V/3.0 A DC
• For charging and discharging up to six AA or AAA NiCd/NiMH cells
• Adjustable charging current 0.1 A - 2.5 A
• Adjustable discharge current 0.1 A - 1.5 A
• Charging, discharging, shaping, animating.
• Termination of charging using automatic delta-peak.
• Adjustable end voltage for discharging 0.8-1.0V
• Measurement of voltage and internal resistance of cells
• Formation of accumulators (charging and discharging with a small current).
• Maintenance charging 30-99 mA (can also be turned off completely).
• Setting parameters and moving through the menu using the button and wheel/button on the charger.
• LCD display with a simple and clear menu and display of parameters during charging.
• Compact solid plastic box with a large ribbed aluminum cooler on the bottom - the charger is quiet, no fan makes noise.
• Mains supply 12 V/3.0 A.

The charger set includes: NC2500 Pro, mains supply 12 V/3.0 A, instructions.