EV-Peak A9 Ultra fast charger, EV-Peak Touch A9 1350W

New version of the proven high-performance charger with integrated 8-channel balancers with comfortable and yet simple operation. Up to 1350 W of power per channel (at a supply voltage of 24 V or higher) controlled by a pair of fans will reliably satisfy even the most demanding user. 20 memories for loading programs. Very simple work even if you use dozens of different types of sets!

Properties

• Input supply voltage 11-28 VDC
• channel for charging and discharging 1-22 NiCd/NiMH cells, 1-8 Li-ion/Li-poly/Li-Fe cells or Pb 2-32V gel lead batteries
• Adjustable charging current (0.1 A - 25 A). Max. power 1350 W
• Adjustable discharge current (0.1 A - 25 A).
• Termination of charging using automatic delta-peak for NiCd and NiMH accumulators, selectable charging mode (Normal, Linear, Reflex) with manual setting or fully automatic.
• Lithium and Pb batteries are charged using the "constant current/constant voltage" method
• Adjustable delta-peak detection sensitivity
• Repeated cycle charge/discharge or discharge/charge for NiCd and NiMH batteries
• built-in intelligent balancer used for individual voltage equalization of individual cells of the connected lithium battery pack with a tolerance of 5 mV during charging or discharging. The voltage on the individual cells is continuously displayed on the display during balancing.
• Temperature measurement with additional temperature sensor
• Measuring internal resistance of accumulators
• Termination of charging when the set temperature, capacity or time is exceeded.
• Memory for 1 0 loading programs for each channel
• Backlit LCD display with simple and clear menu and parameter display during charging simultaneously for both channels
• 3 built-in powerful fans for effective forced cooling
• A series of warning text messages contribute to safe operation – wrong input voltage, wrong connection, unsuitable battery or its condition, wrong output polarity...
• Protection against reverse polarity and short circuit at the output.
• Power source: For full use of the parameters, the charger requires a stabilized source of at least 24 V/40 A (available source power 960 W), for normal operation stabilized sources, e.g. 13.8 V/40 A are sufficient
• Adjustable power limitation to protect against overloading of the power source. Thanks to this, the charger can be powered from a source with a lower load (from 12 V/5 A) without the risk of overloading a less powerful source.
• Adjustable power ratio for individual charger channels.
• Compact fixed cabinet, small dimensions

Great care is taken when charging lithium batteries. If you also connect the rechargeable lithium kit via the service connector, you have the opportunity to monitor the voltage on the individual cells during the entire charge or discharge, and the built-in balancer equalizes the voltage of the individual cells. A pair of system adapters - JST-EH (FOXY, Kokam, Graupner) and JST-XH (EasyCopter/Align/DualSky) are supplied with the charger to connect the service connector of the charge/discharge kit. A separate connection plate of the adapter for the service connectors of the PolyQuest/RAY G2 and ThunderPower/ThunderFlight/MPX systems can be purchased separately. Li-poly batteries for RC cars in the RAY Hardcase can be connected using both types of special charging cables (#7987 and #7988), while using the #7988 Raytronic cable you will not need an adapter.

For temperature measurement, it is possible to purchase a temperature sensor (identical for Equilibrium).

Charger set includes: Balance plate for all 1-8S balance tips, touch pencil, car battery clamps for field use.

charging connector: JR connector, Bec connector, glow plug, bananas, Dean-T

Note: USB on the charger can be used for independent charging of a mobile phone 5V/1A

Note: The method of operation of the KS-Racing Monster Touch charger is the same as the operation of the KS-Racing EVO touch.

Parameters:

DC Input voltage: 15-32V

Charging: max. 1350W

Discharge : max. 250W

Charging current : range 0.1-25A

Discharge current : range 0.1-25.0A

Balancing: 1A

NiCd / NiMH battery number of cells : 1 - 26cells

Number of LiPos :  1 - 8 series

Pb battery voltage : 2 V - 20V

Digital Power : 3V - 32V

Contains an operating system, draws charging graphs, can be connected to a PC.

Weight: 1520g