HUSKY 1800S (ARF) - Demo

More information about the original product:

Allrounder
Attention fans of short takeoff and landing aircraft, here is your new model!
The RC airplane model made of SOLIDPOR® Graupner Husky 1800S hard foam features not only low surface load but also very good flight characteristics at low speeds and versatile applications, it also has a remarkable short take-off and landing. The Husky model can be converted not only with XXL wheels, but also with skis (No. 13410.43 skis) or floats (No. 13410.44 floats). The aircraft already has a tow coupling pre-installed, which only needs to be supplemented with a servo and the appropriate connection. With this aircraft model, glider models up to 2 kg can be brought to the correct height using the F-haul. The current 4S 2200 battery and motor settings ensure sufficient thrust and flight time.
Thanks to the proven quick-lock technology on the wings, already used on the HoTTrigger 1400S, the model is ready for use on the flying terrain. The struts of the bearing surface are secured only by a split pin, as they have a purely optical function.
Rivets and metal bumps ensure the necessary optical advantages. Thanks to the technical solution, we managed to achieve a very good combination of neutral and simple flight behavior despite the scale dimensions. In addition to good flight characteristics, this model allows use for light aerobatics. For this reason, the ailerons and flaps are designed somewhat larger than the original ones. Control surfaces are suspended by hinges such as HoTTrigger. These ensure the necessary precision of the joints.
All screws in the aircraft are made in a hex socket. Lock nuts were used throughout instead of regular nuts.
The controller, motor, LED, elevator, rudder, ailerons and flaps are already mounted. Only a few work steps are required to prepare the model for flight. You are spoiled for choice and have to decide on one of the three decoration options and stick them on.
The receiver is installed through the rear left window, which is fixed with a magnetic lock. The servo input of the servo traction device is also located here. For the installation of the antenna, two plastic tubes are already glued into which the antennas can be easily inserted.
The decorative sets are part of the set in three colors and two designs and are already pre-cut. The cut contours contain almost all the recesses or separations necessary for gluing the decorative set without additional work.
Conversion for individual applications can be done quickly and easily. The main landing gear can be removed in one piece. For balloon tires, the wheels must be removed with the wheel covers. The skis are mounted on the rims of normal tires. The floats are bolted to the sides of the hull like the original and held in place by a turnbuckle.

Function

• Quick-release sash without screws
• Aluminum chassis
• Carbon fiber tube for wings
• Joints of control surfaces with double corners and ball joints
• All control surfaces are equipped with plastic hinges
• The flap is covered
• LED lighting
• Big flaps
• Short takeoff and landing
• Tow hitch
• Versatile drag on balloon tires, skis and floats.
• 3 different colored decorations
• Take-off weight: 2500 g (including 4S 2200 mAh LiPo)
• Take-off weight including skis: 2610 g (+ 110 g skis)
• Take-off weight including float: 2660 g (- main device 220 g, + 380 g float)
  

The set includes

• Hull with 2 servos
• Motor 800KV 12 poles (No. 13410.81)
• Speed controller 40A XT60 2 - 4S
• LED controller
• Wings with 2 servos and LED lights
• Lift
• Rudder
• Main landing gear with standard wheels and pant wheels
• Rear chassis
• Balloon tires
• Spinner
• Propeller
• Screws and small parts
• Decals for three color versions

Technical details

• Weight [g]: 2500
• Height [mm]: 350
• Total length [mm]: 1200
• Material: Graupner SOLIDPOR® Rigid
• Wingspan [mm]: 1800
• Version: ARTF

Notice

According to Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned systems and third-country operators of unmanned systems and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on rules and procedures for the operation of unmanned aircraft , operators and pilots of unmanned aerial vehicles (classic aircraft models, multicopters, drones) that weigh more than 250 g or carry a camera or other sensor capable of capturing personal data in any way are required to register (in the Czech Republic with the Civil Aviation Authority) . More information can be found here: Registration of drone operators and pilots