3EL10532V2
New product
2 pcs
Place to pick up | Delivery |
Store Českobrodska 566, Praha 9, 19800 | in 30 minutes |
Mode of transport | Delivery |
DPD Private- Delivery to the Czech Republic | Tomorrow |
Czech Post | Tomorrow |
PPL - Delivery to the Czech Republic | Tomorrow |
Zásilkovna | Tomorrow |
Balíkovna | Tomorrow |
Mode of transport | Delivery |
DPD - Delivery to the Slovakia | After tomorrow |
GLS - Delivery to the Slovakia | After tomorrow |
PPL - Delivery to the Slovakia | After tomorrow |
DPD - Delivery to Germany | After tomorrow |
DPD - Delivery to Poland | After tomorrow |
DPD - Delivery across Europe | 25.03. |
GLS - Delivery across Europe | 25.03. |
PPL - Delivery across Europe | 25.03. |
Zásilkovna SK - výdejní místa | After tomorrow |
Zásilkovna SK - Packeta home | 22.03. |
Zásilkovna PL - na adresu | 25.03. |
Zásilkovna PL - paczkomaty | 25.03. |
Hermes DE - výdejní místa | 25.03. |
Rakouská pošta | 25.03. |
-5,24 €
Availability date:
The new generation of AXI V2 has higher performance thanks to its sophisticated design, which in conjunction with an integrated cooling system based on the principle of a turbine effect airflow keeps the motor windings cooler by up to 20%.
Robust and reliable high-performance brushless motors AXI 2814 / xx V2 with rotating drum and neodymium magnets have a hardened steel shaft with a diameter of 5 mm is a two ball bearings, which ensure very good mechanical stability under normal and inverted mounting. Rotors AXI 2814 / xx V2 are exported to most modern dynamic balancing equipment from a reputable company Schenck. High-quality Japanese bearings supplied to the engines of the V2 is characterized by higher durability and quiet operation.
AXI 2814 / xx V2, thanks to its great to torque suitable for large propellers without the need for a gearbox, which ensures high efficiency of the entire drive.
Labeling system Engine: AXI xxyy / zz |
xx - stator diameter in mm |
YY - stator length in mm |
zz - number of threads |
AXI 2814/12 brushless motor V2 is learned to drive models with a flying weight to 1800 g with power from dvoučlánkového tříčlánkového or Li-poly battery. Perfect for a brisk motor gliders and aerobatic models up to 1400 g, which better indicates a smaller diameter propeller with a higher speed.
Motor mounting: AXI 2814/12 V2 is designed for front and rear mounting. When front mounted behind the front motor using four M3 screws that extend into the front of the engine in the range of 3.5-4 mm. Motor bulkhead should be from 4 mm air plywood.
Set engine comprising: a brushless motor AXI 2814/12 V2 cables, collet carrier for fixed pitch propeller, set for rear assembly instructions. < / P>
Power LiXX Articles | 2-3 |
The speed at Volt [ot./min/V] | 1390 |
Number of turns | 12 |
Internal resistance [mOhm] | 53 |
Load current [A] | 1.8 |
max. efficiency [%] | 83 |
Current at max. Efficiency (?> 75%) [A] | 15-25 |
Max. peak current (60) [A] | 36 |
Max. power [W] | 360 |
Diameter [mm] | 35 |
Length [mm] | 37.5 |
Shaft diameter [mm] | 5 |
Weight [g] | 107 |
Number of poles | 14 |
Timing [°] | 15-25 |
The regulator [A] | 40-50 |
Glider in weight [g] | 1800 |
Trainer to the weight [g] | 1800 |
Acrobat in weight [g] | 1400 |
3D into the mass [g] | 1200 |
Recommended propeller | 3S: 9x4 ", 9x4,5" 9x5 ", 10x4,7" |