5841 HTS-VOICE telemetry voice output

Telemetry is a great thing, but few have the flight time to watch "alarm clocks" without any danger of piloting errors or loss model of oversight (eg. The flying gliders thermals high altitude). It takes a helper who will whisper in your ear the necessary data. It may be a fellow modeler or pretty American girl, whose pleasant voice will sound from the speech telemetry HTS-VOICE!

HTS-VOICE is under control, which will be at intervals you choose to report the value of telemetry features that you choose to report. Besides simple basic readout of actual values, you can set threshold levels for warning messages indicating eg. To a voltage drop exceeding a certain level, exceeding the maximum permissible current etc. Messages can be heard from the speaker built in HTS-VOICE or from the handset, which can plug into the socket (3.5 mm jack) for voice output, which automatically disconnects the speaker. Volume can be adjusted continuously digital button on the HTS-VOICE.

HTS-VOICE is compatible with all 2.4GHz transmitter Hitec - whether with replaceable RF module SPECTRA 24 or with fixed RF 2.4GHz AFHSS work.

To fully exploit the need to use telemetry receivers Optima 7 or 9 with an attached telemetry logger HTS-SS Nitro or HTS-SS Blue with telemetric sensors. When using Optima receivers 6, 6 Light Optima and Optima receivers 7 and 9 without telemetry data logger will be reported only basic telemetry functions - receiver voltage.

HTS VOICE, you can simply use the included bracket mounted on a metal holder transmitters Hitec Velcro on the counter transmitters, etc. For power it will need two AAA (AAA) alkaline batteries or NiMH batteries (preferably with low self-discharge). The data port RF module SPECTRA 24 or data port transmitters (5 Optic, Optic 6 Sport 2.4GHz, Eclipse Pro) is connected to a cable supplied with a triplex flat with standard servokonektory. Socket data port on the HTS-VOICE is a double, allowing sočasně connect interface HTS-iVIEW for displaying telemetry display Apple devices (iPod, iPhone, iPad).

Operating status HTS-VOICE is signaled by the status LED and a message from the speaker. For digital control serves the function button - a long press on the device on and off, swinging up and down to adjust the volume or setting mode is used to navigate the menu and adjust the required parameters.

Basic settings (select units of measurement imperial / metric, set the delay between messages, select the range of current measurement according to the sensor used) can be made directly to HTS-VOICE without additional devices. Comfortable programming provides voice output connections HTS-VOICE to your computer via HPP-22nd The utility (software version for HPP-22 1.12 or later) in an easy menu to select the function whose values \u200b\u200byou want to report reporting interval (continuous, delay 10 s, delay 30 s) for individual sensors to set the information necessary for correct measurement ( the number of blades for tachometers, type sensors for measuring current) and activate warning messages (along with threshold levels to trigger an alarm) for each measured variable. Setting parameters HTS-VOICE is of course possible to store and record again - so you can set the voice output "tailor" individual models.

Pictorial instructions for setting up HTS-VOICE using HPP-22 and a computer program and a dictionary containing a list of English reporting along with their phonetic transcription and the Czech translation, see the section "Downloads".

The kit includes: TTS HTS-VOICE, data cable and manual.