Killerbody light set with 14 color LEDs for RC car models. LEDs have a diameter of 3 and 5 mm.
Orange LEDs
- The cable length from the connector to the first 3 mm LED is 29 cm.
- The cable length between the first and second 3 mm LEDs is 43 cm.
- The cable length between the second and third 5 mm LEDs is 11 cm.
Red LEDs
- The cable length from the connector to the first 3 mm LED is 30 cm.
- The cable length between the first and second 5 mm LEDs is 15 cm.
White LEDs
- The cable length from the connector to the first 2 x 3 mm 1 x 5 mm LED is 29 and 32 cm.
- The cable length between the first and second 2 x 3 mm 1 x 5 mm LEDs is 12 and 26 cm.
Other
- The Y-cable has a length of 32 cm.
Control unit functions description
The control unit is equipped with 8 LED outputs. There are 2 modes: A and B, which are selected using the slider on the control unit. All LEDs flash when power is applied. As soon as there is a change in the throttle or control channel, the LEDs will stop blinking and will work according to the table below. After 15 seconds of inactivity, the LEDs flash again.