> 10 pcs
Warning: Last items in stock!
Multiplex again succeeded previously unimaginable - in a single model to combine features and capabilities that are much closer with 3D models while retaining the ability to use FunCub as a school and a practice model for beginners. Therefore, in our evaluation of pilot performance will find an unusual figure P1-3 - FunCub when appropriate setting suitable for beginners and recreational pilots and seasoned athletes who fully utilize its "Fun" potential. Take a closer look, how is this possible ...
FunCub preservation now traditional "multiplexáckou" construction of highly resistant foam ELAPOR which ensures easy and quick construction, light weight, strength and durability in operation and ease of repair if the pilot something goes wrong. From its predecessor, proven academic and practice EasyCubu, takes over the tail and fuselage, which, however, has reinforced motor mount for mounting considerably more powerful engine class in 2814 and AXI possibility of adding tripping hook for aero tow. Completely new wing is controlled by the ailerons; everything is well prepared for mounting slotted flaps. The striking new feature is the giant "balloon" Wheels of ELAPORu. Oddly enough, this seemingly "unrealistic" element has a firm foothold in the real Piper for "bush flying" flying well with giant wheels, which are priceless needed in Alaska. 6-7 microservo on board, of course, means that you will need to use a speed controller with a properly sized BEC power stabilizer - eg. FOXY R-45SB or Jeti SPIN series.
Excess performance, highly efficient wing flaps and giant wheels are precisely what makes the FunCubu "entertainer". It can take off and land on a dime, literally, depends on the propeller taking off and landing as well as from higher grass or uneven ground, where it would have a different model to "operate" could. For summer holidays on the water, you can buy floats - excess engine power and precise control with ailerons and flaps again allow seamless operation and seaplane pilots with no previous experience in naval aviation.
You can also supplement the tow hook (it can be installed at any time, and in addition to finished and létaného model) and FunCub turn into a drag that reliably gets tall and dvoumetrovku such as Easy Glider.
If flying just starting out, you do not have these capabilities FunCubu panic - for starters need to install the control valves (can be added at any time and the finished model), you can mount and weaker engine, but also set up smaller, 'catholic' size 'deflection. And behold, you have a first-class stable and good practice with a controlled-wing ailerons - large and clearly visible, which is not a freak of each light breeze, as is the case with smaller models.
Two-piece wing of Elaporu imitation design and slack canvas covering on the upper side has a profile with a flat bottom side, it is reinforced by a pair of laminated beams and the fuselage is fastened using two M5 screws polyamide. The ailerons are ruled by two servos, which are assembled into molded shafts. Everything is ready for installation also control the flaps. The root of the right wing can be installed microservo controlling mechanism towhook Aerotow. Fuselage classic "multiplexácky" premeditated design consists of two Elaporovými moldings. Excellent access to onboard equipment RC and easy replacement of the propulsion battery provides a removable canopy, adjustable motor mount ensures easy installation and adjustment correct misalignment of the engine. Hull passes through the channel to ensure perfect cooling air to the engine controller and the drive battery. The tail surfaces are also Elaporové, indicated with "ribs" and sagging skin. To control the rudder and elevator servos is a pair of size-81 HS, stored in preformed pits on the fuselage sides. The main chassis is a two-round, wire, attached to a plastic holder (as the models MiniMag, Gemini or AcroMaster). The spur is manageable, its console anchored to the rear fuselage form one unit while the lower hinge and the rudder stick. The wheels are large "balloon" tires with a black colored ELAPORu.
Kit includes: moldings fuselage, wings and tail surfaces of Elaporu, laminated beams wings, levers, cables and other small accessories Dratva main landing gear mechanism towing hook, wire spur lightweight wheels from the EPP, a large sheet of adhesive decals and detailed instructions for building and flying.
For FunCub can buy a set of floats (cat. No. 73 of 3063), with which a lot of fun on the water as well.
Tip: To get "piperovitějšího" appearance, which is inherently yellow, you can spray the spray model RC Car Colour, color no. 019 Yellow. Make sure you sprinkled a very thin layer 2-3 Cross. If you attempt to spray thick, paint will peel off. Another reason for the investigation of the color is also that a thick layer of paint adds a lot of weight.
|Wing area [dm 2]||38.5|
|controlled functions||S, V, K (2), M, F (2)|
|Difficulty piloting||P1, P2, P3|
Recommended drive and RC equipment:
|RAY Coach||RAY Fun||FOXY Fun||AXI Fun|
|Engine||RAY G2 C3536-1000||RAY G2 C3536-850||FOXY G2 C2814-850||AXI 2814/20|
|Regulator||RAY R-40A Combo Set||RAY R-50SB||FOXY R-45SB||FOXY R-45SB|
|power pack||RAY 11.1 V 2200 mAh||RAY 11.1 V 2200 mAh||RAY 11.1 V 2200 mAh||RAY 11.1 V 2200 mAh|
|Propeller||APC 11x5,5 "E||APC 13x4 "E||APC 13x4 "E||APC 13x4 "E|
|Serva||2xHS-81 (S + V) 2xHS-55 (K)||2xHS-81 (S + V) 4xHS-55 (K + F)||1xHS-82mg * 1xHS-81, 2xHS-65HB (K) 3xHS-55 (F-hook)|
|RC rig||min. 4 channels||min. 5 channels||min. 6 but rather 7 channels|
|*) For float versions with water and rudder for "bush flying" from the taller grass or uneven ground, it is preferable to fit the rudder servo with metal gears.|