Traxxas Chevrolet Corvette Stingray 1:10 RTR Silver

Chassis 4-Tec 3.0

The Traxxas 4-Tec 3.0 chassis consists of a three-dimensional composite molding (nylon filled with glass fibers), which is light and at the same time rigid. Everything was subordinated to obtain the lowest possible position of the center of gravity.

To simplify maintenance, the chassis is a modular construction. The front, center and rear of the model can be easily separated.

Chassis 4-Tec 3.0

The new chassis has grown by 15% compared to the previous version, the greater length and width of the model, together with larger wheels and 4x4 drive, contributes to perfect handling.

4x4 drive

The excellent driving characteristics of the model are enabled by all-wheel drive. Torque is transmitted from the engine through the center drive shaft, differentials and axles to the wheels. All shafts are mounted in bearings for maximum efficiency.

Oil dampers

The 4-Tec 3.0 chassis effectively overcomes unevenness with oil dampers with exclusive X-rings that seal perfectly. The shock absorbers are adjustable - the spring preload can be changed using washers, the stiffness can be adjusted by changing the viscosity of the oil in the shock absorber.

Possibility of increasing the angle of rotation of the front wheels, limiting the vertical movement of the arms

Traxxas remembered those who liked to drift. It is important for drifting that the range of turning of the front wheels is as large as possible. That's why the front suspension of the 4-Tec 2.0 chassis is designed so that you can increase the steering angle with a simple adjustment.

Furthermore, the suspension includes a restrictable vertical movement of the arms. You can limit the vertical movement of the arm with the M4 adjusting screw. This allows you to turn corners faster and improves driving characteristics when drifting.

Adjustable servo saver

The integrated servo-saver not only safely protects the servo from shocks, but also allows easy adjustment of the stiffness of the nut, according to your requirements or conditions on the track

Front and rear differential

Ideal power distribution is ensured by the front and rear differentials. The lock of the differential can be changed by changing the oil to a different viscosity (thicker or thinner).

Fixed tooth clearance

Precise adjustment of the inter-tooth clearance is no longer a toy. The motor bed contains mounting holes for precise adjustment.

Model wheels with disc brakes

The model is equipped with new, larger 2.1 "wheels, which are exclusively in black chorm. On 5-spoke wheels, with a 12 mm carrier, there are on-road tires with highly adhesive tires. with stirrups.

Latch body clamping

The new system of clamping the body using beaks from the bottom, allows quick assembly and disassembly of the body. With the new latch system, disassembling the body removal and replacing the propulsion battery will be a breeze.

Latch body clamping

The new system of clamping the body using beaks from the bottom, allows quick assembly and disassembly of the body. With the new latch system, disassembling the body removal and replacing the propulsion battery will be a breeze.

Servo control

The digital Traxxas servo 2075 high-torque waterproof with DC motor and nylon gears has a torque of 9.0 kg.cm and a speed of 0.17 s / 60 ° @ 6.0 V. For water resistance *, the servo box and the output square are fitted with a seal. Two ball bearings provide very smooth running.

Powerful Titan 12T engine

The car model is equipped with a modified DC motor Titan series 550 12T. The engine has 30% more power than conventional 540 engines. The rotor at the rear of the engine contains a propeller that blows air into the engine and effectively cools it.

Electronic controller Traxxas XL 5

Waterproof * electronic controller Traxxas XL-5 with three driving modes, support for modern high-capacity LiPo batteries and easy operation with the EZ-Set ™ button. The XL-5 controller is equipped with a training mode that limits full throttle to 50%. Thanks to this, novice drivers or children can gradually get acquainted with the features of the model and prepare for the full power of the car. Thermal protection, gold-plated connectors and incredibly low internal resistance are the motto of this controller / p>

XL controller modes 5

• Sport : Default mode, forward, braking and reverse are possible.
• Race : A mode suitable for racing. Forward travel and brake are possible; reverse is not available.
• Training : A mode suitable for children or novice riders. It is possible to drive forward with a power limitation of 50%, brake and reverse travel again with a power limitation of 50%.

TQ receiver

The three-channel Traxxas TQ 2.4 GHz receiver ensures safe control without outages. Easy one-button pairing. Status indication by LED diode.

RC set Traxxas TQ

The model is controlled by a two-channel proportional steering wheel RC transmitter Traxxas TQ, operating in the 2.4 GHz band - operation without interference. The transmitter is powered by only 4 AA cells.

There is a rotary knob on the transmitter that trims the steering wheel (so that the model is straight when the steering wheel is in the center position). The indication of the battery status in the transmitter is indicated by an LED diode. The transmitter can be set to reverse the throttle channel and control (if you would like to use the transmitter to control other models).

Recommended LiPo batteries:

With modern LiPo batteries, the model will have maximum acceleration. The model can be operated on a 2-cell (7.4 V) LiPo battery.

• For higher performance LiPo battery Traxxas 7.4 V 5000 mAh
• For higher performance and long driving time LiPo battery Traxxas 7.4 V 7600 mAh

Recommended NiMH batteries:

NiMH batteries are not demanding on precise handling and are therefore suitable if the RC model of the car is operated by children (NiMH batteries are not destroyed by complete discharge). However, NiMH batteries do not provide such performance.

• NiMH battery Traxxas 8.4 V 3000 mAh (flat)
• For longer driving time NiMH battery Traxxas 8.4 V 5000 mAh (flat)

Recommended Traxxas chargers

Traxxas universal chargers can be used to charge Traxxas LiPo and NiMH batteries. Traxxas chargers are a simple and safe way to charge batteries. Traxxas uses the unique iD system , so you can always be sure that you can connect everything easily and safely. There is an integrated chip in the battery connector, which the Traxxas charger automatically recognizes and sets all battery charging parameters for you. More information here.

• Traxxas EZ-Peak 50W mains charger with one output
• Traxxas EZ-Peak 2x50W mains charger with 2 outputs

Accessories for normal operation

For normal operation of the Traxxas RC car, you need screw glue, high-quality tire glue, silicone shock absorber oil and a set of screwdrivers. From our range we recommend an affordable set of tools for cars.

The screw glue drips the thread or the head of the screw, which fixes it and the vibrations caused by driving do not allow the screw connection to loosen. The screw adhesive has a special composition that allows the screw connection to be easily loosened with a reasonable torque without damaging the screw head. Never use ordinary instant glue, it could be impossible to loosen a screw glued in this way at all!

The tire glue adheres the tires to the rim of the disc. It is always necessary for the tire to be firmly glued to the wheel rim around the entire circumference! If the tire is not stuck around the entire circumference, it may rupture. The tire adhesive has a special composition that is able to bond materials such as rubber or nylon, and at the same time, after hardening, the adhesive is flexible. Never use ordinary instant glue - it is not flexible after hardening and cracks in the tire would gradually form around the rims!

Occasionally it is necessary to add silicone oil to the model's shock absorbers. During normal operation, there is only a slight leakage of silicone oil along the shock absorber piston rods. If the surface of the shock absorber piston rods or the condition of the seals is in poor condition, the oil leakage can be large. For these cases, so-called repair kits are supplied. In the range of tuning parts, piston rods with an extremely hard TiN (titanium nitride) coating are supplied with all shock absorbers. You can easily recognize the piston rods with a TiN surface by the gold-green color.