TRA83024-4
New product
This product is no longer in stock
Availability date:
Traxxas 4-Tec 2.0 is an affordable 1:10 on-road RC model car chassis. All-wheel drive, DC motor and controller, waterproof electronics. Basically speed over 48 km / h. Compatible with standard on-road bodies.
The history of the classic (on-road) Traxxas models began with the Traxxas 4-Tec. It was a classic building - the axle drive was solved by straps, the model was then fitted with a DC motor and a resistor regulator - the speed of the motor was controlled by resistors, which were mechanically controlled by servo. And how else, the 27MHz RC kit ... Traxxas has decided to restore on-road RC car models in its portfolio, taking advantage of the extensive experience of the previous 4-Tec 1.0 chassis.
The Traxxas 4-Tec 2.0 chassis is a three- dimensional composite molding (glass-fiber-filled nylon) that is lightweight and tough. Everything was subordinated to obtain the lowest possible center of gravity. The axle drive is no longer solved by problematic straps, but by the central shaft - similar to the Slash 4x4 models. The model comes with a Titan 12T DC motor and XL-5 controller. Motor and controller mounts allow the use of brushless motors such as Castle Creations.
To simplify maintenance, the chassis is modular. Easily separate the front center and rear of the model.
Traxxas remembered that each body has specific shapes and hence other places for optimal attachment. That's why the Traxxas 4-Tec 2.0 is on the chassis Adjustable body holders are used so you can fasten your body at the most convenient location.
Placing an on-road body such as from Killerbody will be no problem!
Traxxas remembered those who like to drift. For drifting it is important that the front wheel cornering is as large as possible. Therefore, the suspension of the 4-Tec 2.0 front wheels is so conceived and the simple adjustment can increase the corner angle up to ?? ° .
Furthermore, the limiting vertical movement of the arms. The M4 (Order No. TRA4897) screwed into the arm reduces the vertical movement of the arm. This allows you to drive faster through turns and improve drifting performance.
Do you use 23 mm NiMH batteries and 25 mm LiPo batteries? No problem for TRX chassis. Simply rotating the bracket ensures that the battery is 23 mm or 25 mm high. In addition, the battery holder does not fasten with a clip, but with a plastic clip from the side.
Traxxas XL-5 Waterproof Electronic Controller with Three Driving Modes, Support for Advanced High Capacity LiPo Batteries and EZ-Set ™ Easy Control. The XL-5 is equipped with a training mode that limits full throttle to 50%. This allows novice drivers or children to gradually learn about the features of the model and prepare for the full power of the car. Thermal protection, gold-plated connectors and incredibly small internal resistance are the core of this controller / p>
The car model is equipped with a modified DC 550 Titan motor with 12 threads on the rotor. The engine has 30% more power than conventional 540 engines. The engine is fitted with a cooling fan.
The model is controlled by a two-channel proportional steering wheel RC set in the 2.4 GHz band - no interference operation. The transmitter is powered by only 4 AA cells, you can also use rechargeable NiMH batteries.
The transmitter has a rotary knob to trim the steering of the wheels (so that the model is straight when the steering wheel is in the center position). The battery status indication in the transmitter is indicated by an LED. On the transmitter, you can set the throttle reversal and control (if you want to use the transmitter to control other models).