Arrma Senton Mega 1:10 4WD RTR

The RC model of the Arrma Senton Mega 1:10 remote control car on a 1:10 scale Mega 4x4 chassis reaches speeds of up to 48 km / h. Reliable RC kit SLT3. Stronger chassis, differentials and shock absorb

ARA4203V3BIT1

New product

ARRMA

Sale ended

More info

Tuning parts

Spare parts

Recommended accessories

More info

Package contents

The package contains a completely assembled RC model car with remote control Arrma Senton Mega 1:10 4WD RTR with installed components: DC motor Mega 550 12T, regulator Arrma Mega 2S with connector IC3, servo control Spectrum ™ S650 5kg.cm@6V, Spectrum receiver SLR300 2.4GHz 3CH. Transmitter Spectrum SLT3 2.4GHz. The package also contains a NiMH battery 8.4 V 3300 mAh with mains charger, a multilingual manual in English, German and French and instructions in Czech.

Characteristics

The RC model of the Arrma Senton Mega 1:10 remote control car on a 1:10 scale Mega 4x4 chassis reaches speeds of up to 48 km / h. Reliable RC kit SLT3. Stronger chassis, differentials and shock absorbers. The set is in the RTR version, so it contains everything needed for operation.

Arrma's RC models on the Mega 4x4 chassis are here again and with many improvements! The Arrma Senton Mega RC car has 4x4 drive and provides maximum traction and performance on any surface. Model speed up to 48 km / h. The model is completely assembled with incredible equipment. Thanks to the high ground clearance, the model is especially suitable for outdoor environments. You only need 4 AA batteries for the transmitter to get the model up and running.

QQ4WUZ9DRUKZP6QQ4YGGG2RGTTT3GH9WHBXRN3G6
Made changes compared to the previous version
  • Reinforced chassis at the front and rear axles.
  • Redesigned engine bed to reduce the ingress of dirt.
  • Metal gear differentials that are ready to install an optional AC drive.
  • Shock absorbers with new O-rings for better operation and maximum tightness.
  • New servo with servo saver
  • New three-channel RC kit Spektrum SLT3.
ARA4203V3IT1_5.jpg
Compact chassis

The construction of the RC car chassis is arranged to achieve a perfect balance of the RC car model. The drive shaft is in the middle, the battery on one side and the electronics on the other. In addition, the entire chassis is equipped with side covers that limit the ingress of dirt into the model. The battery is firmly seated in place using straps.

ARA4202V3I_8.jpg
More robust chassis with aluminum reinforcements

The composite chassis has been redesigned and aluminum axle reinforcements to provide increased durability in exposed areas.

ARA4202V3I_22.jpg
Front and rear differential

The Arrma Senton Mega 1:10 RC model car is equipped with a front and rear differential, which ensures maximum traction. The differentials are fitted with metal gears and the shafts are mounted in bearings. The wheel drive is realized by means of telescopic half-axles. The drive gear for the differential is newly metal as in the 4S models. The model is ready for upgrade to AC drive.

ARA4202V3I_24.jpg
Oil shock absorbers

The oil dampers are equipped with new O-rings that provide smooth running and safely keep the oil inside the damper. The shock absorbers are equipped with impact guards on the front. Stiffness and ground clearance can be changed with oil viscosity or spacers. The construction of the damper ensures easy service, all you have to do is push the damper to the stop and unscrew the upper bowl from the damper body.

stramodel.cz/content/descriptions/arrma/ARA4203V3IT1_17.jpg">
Wheels and tires for any terrain

DBoots Fortress SC universal tires are glued to 2.2 "spoke discs with 14 mm hexagonal carriers.

ARA4203V3IT1_16.jpg
Easy service

The model is designed for easy service. Loosening the 5 screws can remove the electronics block containing the controller, power steering and receiver in a waterproof * box.

ARA4202V3I_26.jpg
New servo-saver

Servo protection against strong impacts is provided by a servo-saver, which is connected to a top-of-the-line Dual Bell Crank steering. If necessary, the box is provided with an explanation for setting the neutral.

ARAG1005.jpg
DC motor

The drive model is provided by a powerful DC motor Arrma Mega 550 12T. The engine is equipped with an internal impeller for efficient cooling.

ARA4202V3I_19.jpg
Servo Spectrum S650

Quality standard size servo Spektrum S650 has plastic gears, torque 6 kg.cm, speed 0.12 s / 60 ° at 6 V supply. Inserted O-rings give the servo splash water resistance. The output thousand-sided servo has 23 teeth.

ARA390288.jpg
MEGA 12T controller

Arrma Mega 12T DC controller with water-resistant * switch, passive cooling and surge protection. Power supply by two-cell LiPo or 6 to 7 cells by NiMH battery. Easy setting of battery type and return by shorting jumpers.

  • Easy setting of parameters by short-circuit jumpers
  • Waterproof * design
  • Bullet connectors for connecting an electric motor
  • IC3 connector for battery connection
stramodel.cz/content/descriptions/arrma/IC3_PP.jpg">
New IC3 connectors

The new IC3 connectors have a modern design with an emphasis on safety and simplicity. The contacts are made of gold-plated pins and sockets.

As already mentioned, the connectors have been designed with an emphasis on safe and easy use. The connectors cannot be reversed, the contacts and soldered connections are covered with a plastic cover. The IC3 connector is backward compatible with EC3.

SPMSLT300.jpg
Transmitter Spectrum SLT3

The basic 3-channel Spectrum SLT3 transmitter operating at 2.4 GHz is compatible with the SLT protocol. The light weight of the Spectrum SLT3 transmitter allows you to hold without fatigue. The steering wheel is covered with a foam rim for a firm grip. The layout of the controls is practical and intuitive - all controls are positioned so that they are quickly accessible when needed. A secure loop is available for fastening to the strap.

  • 3-channel steering wheel RC set Spektrum SLT for reliable control
  • Proven design for comfortable grip without fatigue
  • Possibilities of limiting the maximum deviations of the control channel and gas
  • Double steering channel deflections and 50%, 75% and 100% engine power limiter
  • You can use the third channel for additional devices, eg for sound modules.
SPMSLR300_b01.jpg
SLR300 receiver with SLT-FHSS protocol

The SLR300 3-channel car receiver is equipped with 2.4GHz, interference-resistant SLT FHSS technology. It is compatible with Spektrum SLT transmitters and is backward compatible with Tactic steering wheel transmitters.

ARA4202V3I_20.jpg
Battery and charger

The package includes a mains charger with automation and a NiMH 8.4 drive battery V with a capacity of 3300 mAh. The battery is equipped with the latest IC3 connector.

ARA4203V3IT1_2.jpg
Body

The finished painted body is equipped with high-quality 3D prints. The body is secured with rubber bands so that you no longer lose any clips.

Features of the RC model car Arrma Senton Mega 1:10
  • New shock absorber design with double O-rings
  • New RC transmitter Spektrum SLT3 with receiver SLR300
  • The RC car reaches speeds of up to 48 km / h
  • Powerful DC motor 12T 550
  • 4WD all-wheel drive
  • Differentials with metal gears
  • Fast servo Spectrum S650 with a torque of 6 kg.cm and a speed of 0.12 s / 60 °
  • Waterproof * Arrma Mega controller
  • RC transmitter Spektrum SLT3 with receiver SLR300
  • Design painted body
  • Dirt chassis side covers make model maintenance easier
  • A maximum battery size of 165 x 51 x 48mm can be used in the model
  • 2.2 "spoke discs with dBoots Fortress SC universal tires
  • Oil dampers with spinning guards
  • The package includes a NiMH battery 8.4 V 3300 mAh with a mains charger

* For information on water resistance specifications, refer to the operating instructions. Tips and tricks for operating in a wet environment can be found in the blog.

ARA4203V3IT1_1.jpg

We recommend buying

To put the model into operation, you only need to buy 4x AA batteries for the transmitter. The battery and mains charger are included in the package.

battery.jpg
Recommended batteries

To extend the driving time, we recommend purchasing an additional battery. For normal riding and for children, we recommend buying another identical battery, which is part of the package. You can use modern LiPo batteries for maximum driving time. If you use different types of batteries, it is always necessary to set the type of connected battery on the controller!

  • For normal riding NiMH battery Dynamite 8.4 V 3300 mAh.
  • For maximum driving time LiPo battery Black Magic 7.4 V 5000 mAh.
  • For maximum driving time LiPo battery Spectrum 7.4 V 5000 mAh with Smart technology.

Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.

charger.jpg
Recommended chargers for LiPo and NiMH batteries

To shorten the charging time and the ability to charge LiPo batteries, we recommend using universal chargers with a power of at least 50 W. (Only NiMH batteries with a charging current of max. 700 mA can be charged with the included set charger.)

  • Dynamite Prophet Sport charger with one 50 W output
  • Spektrum S1080 charger with one 100W output with Smart technology.
tools.jpg
Accessories for normal operation

For normal RC car operation, you need tire glue, bolt glue, a tool kit and silicone shock absorber oil. From our range we recommend an affordable set of tools for RC cars.

The tire glue adheres the tires to the rim of the disc. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not stuck around the entire circumference, it may rupture. The tire adhesive has a special composition that is able to bond materials such as rubber or nylon, and at the same time the adhesive is flexible after hardening. We recommend Robitronic Tire Glue from our offer - see recommended accessories.

Sometimes it is necessary to add silicone oil to the model's shock absorbers and change the oil in the differentials. During normal operation, there is only a slight leakage of silicone oil along the shock absorber piston rods. If the damper piston rod surface or seal condition is in poor condition, the oil leak may be large. Repair kits or individual parts are supplied for these cases. From our range of silicone oils, we recommend TLR (Team Losi Racing) silicone oils, see recommended accessories.

Screw glue is required for routine maintenance. Screws screwed into the metal material (eg screws in the motor, set screw in the pinion) must be secured against loosening with this adhesive.

FO-FS-LCB01.jpg
Protective covers for batteries

Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity for long travel times. On the contrary, the LiPo battery is particularly susceptible to mechanical damage.

Tuning parts

Spare parts

Recommended accessories