Warning: Last items in stock!
Dornier Do 335 (Arrow) was one of the most powerful and the most intriguing fighters end of the Second World War. The tandem arrangement of the two motors - one tension in the bow and the stern second press - should ensure a high aerodynamic purity and eliminate the problem of asymmetric thrust upon failure of one engine. Development of machines characterized by very good flying qualities and high speed stayed a number of childhood diseases by cooling the rear engine of insufficiently rigid chassis, so that by the end of the war was made only a few dozen pieces. With a maximum speed of over 760 km / h would not have been for the Allied fighter very hard nut to crack ...
Semi-scale German twin-engine fighter aircraft for two alternate propulsion motors AXI 4120 class with 6S LiPo.
The fuselage is a classic design in combination balsa / lightweight plywood, fiberglass engine covers are removable. Servos and other electronics are stored in the cabin; Rudder and elevator is controlled by means of wire rods. Access to the drive electronics and a removable battery allows detachable upper torso with a canopy. Soba electric motors are mounted on the back mounted on plywood motor bulkhead.
The two-piece wing with polosouměrným profile with halves nasouvanými the side of the dural tube coupling is a classic balsa structure. The ailerons and flaps are controlled by two independent servos always stored in the wing.
The tail surfaces are also classic balsa structure.
The whole model is account iron semi-matt film in camouflage colors.
Nose undercarriage has three main legs with spring. The kit includes a cushioned landing gear (nose is controllable, independent servo controlled by a rope drive) - chassis can be mounted as a hard or supplement electrical or pneumatic retractable mechanisms (not included in the kit). < / P>
To control the model you need at least devítikanálovou computer kit allowing independent control of the ailerons and flaps. Serva meet the quality standard of stroke 3-5 kg.cm.
Kit includes: built fuselage, wing and tail surfaces covered with iron sheets, fiberglass engine cover, cushioned landing gear, steerable spur wheels, fuel tank, a set of small accessories and image guidance.
|Wing area [dm 2]||61.4|
|controlled functions||S, V, K (2), M (2) P, F (2), bow leg|
|Building intensity||S2, S3|
Recommended drive and RC equipment:
|FOXY||FOXY Pfeil||AXI Pfeil|
|Engine||FOXY G2 C3530-570||FOXY G2 4120-550||AXI 4120/20|
|Regulator||2x FOXY R-85SB||2x FOXY R-85SB||FOXY R-85SB|
|Propeller||14x8 "||15x10 "||15x8 "|
|battery||FOXY G2 22.2 V 5000 mAh|
|RC rig||computer min. 9 channels|