48 "Extra 300 EXP - blue / white 1,21m

Sports semi-cluster of the German aerobatic aircraft for the AXI 2814 AC electric motor for experienced pilots to fly classic precision and extreme 3D acrobatics.

The fuselage is a classic design made of plywood and balsa laser cut-out parts with composite reinforcements with a detachable laminate motor cover and a detachable hull top with cab for perfect access to the drive system and RC equipment. The engine is mounted in rear mounting on a plywood box.

The two-part wing with a symmetrical profile (half sliding from the side to the carbon tube connector and securing bolts) is also a classic construction with a full-body rigid coating. Large ailerons are controlled by 2 independent servos. The wings can be fitted with winglets supplied.

Tail surfaces are all-white with an internal geodetic structure; The BOP is one-piece with a stabilizer attached to the fuselage. Both the elevator and the rudder are controlled by servos located in the tail part of the fuselage with short straight rods. The whole model is coated with ULTRACOTE iron-on transfers (this is a trademark used in the US for well-known Oracover films).

The chassis is of the spur type with its carbon legs, lightweight wheels with laminated covers, and a wire spur with a carbon bracket coupled with a rudder.

For the drive, you will need an AXI 2814 AC motor with a 40-50 A speed controller powered by a LiPo 2100-2700 mAh four-cell battery with a load of at least 40C.

To control the model, at least a four-channel computer RC set - the possibility of programming dual and exponential deflections of the correct size for aerobatics flying - classical precision and extreme 3D - is essential.

Serves fast and powerful in sub-micro size - eg Hitec HS-65MG, HS-5065MG etc. <" / p>

The kit includes: iron-fueled coated fuselage, wing and tailpiece, sprayed laminate engine cover, complete set of accessories, carbon chassis, spur, light wheels and instructions.

Recommended drive and RC equipment: