MXS 3D V2 1100mm ARF

The sports semi-cluster of the acrobatic special from the almost unbreakable EPO for both 3D and classic acrobatics powered by the powerful C3541-KV1230 AC electric motor powered by a three-cell LiPo battery. With small deflections for recreational acrobatics, with great for 3D adrenaline!

The fuselage EPO model fuselage is supplied with an alternating rotary casing (C3541-KV1230) with a 11x5.5-inch propeller, fitted with a 40A AC power controller with a high-power SBEC power stabilizer and servos of the rudder and elevator in the tail. access to the battery and on-board electronics provides a removable cover on the top of the fuselage in front of the cab.

The wing with a symmetrical EPO foam profile is a two-part coupled by a tubular carbon clutch; the hull is inserted from the side and the bolts are secured from the bottom. The end of the wing can be provided with large winglets - "vortex generators" - which help the "keep track" model in extreme 3D turns. Ailerons are controlled by two servos stored in the wing by short wire rods. Prior to attaching the rods, we recommend that the rudders "move" repeatedly with cautious upward and downward deflection, respectively. left and right.

Tail surfaces are from EPO, rudder and elevator are operated by servos located in the tail part of the fuselage by means of short straight wire rods.

The chassis is duralumin with foam wheels, the spur is swiveling, coupled with a rudder.

For the model, you will need LiPo 3-cell 2200 mAh with a load of at least 25C, for maximum use of engine and model options, preferably 35C or more.

To control the model, you will need at least a four-channel RC kit, of course, the advantage will be the owners of multi-channel computer kits that allow individual adjustment and fine tuning of aileron servo. Ailerons, rudder, elevator and engine speed are controlled" / p>

ARF set includes: almost finished model with AC motor, propeller, 40A speed controller, 4 servos, accessory kit and manual.

Drive and RC equipment: