G2 Foxy programming card
Sale ended
View larger

G2 Foxy programming card

Programming card for Foxy G2 controllers.

1RC31035

New product

FOXY

Sale ended

More info

More info

The LED programming card for the FOXY G2 controllers for aircrafts makes it easy and fast to program the controllers at home as well as at the airport. The controller is connected via a servo cable, the socket is located at the top of the box. The card power is provided from the FECX G2 power regulator BEC stabilizer or from standard 4-5 megawatts. NiCd / NiMH or 2S LiPo / LiFe receiver battery connected to the box (for the OPTO controller). Programming is carried out with the connected motor and the drive accumulator (even with OPTO controllers).

WARNING: The FOXY G2 programming card LED can not be used for FOXY controller programming and the first FOXY programming card can not be used to program the FOXY G2 controllers.

FOXY G2 airborne controllers can be programmed in a propeller-mounted model - for safety reasons, however, it is advisable to remove the propeller during programming - to prevent an accident in the event of an omission or operator error. Also, do the programming of the regulators in cars and ships safely seated on the wheeled stand, respectively. with an air screw in the air or with a dismantled pinion or boat shaft coupling.

There are four buttons on the front panel of the card. With this, you select the program functions ("ITEM") for the setting and set their value ("VALUE"). Press the "OK" button to confirm the change and send it to the controller, "RESET" button to clear all settings and return all values \u200b\u200bto the factory default settings. The program function number is displayed on the left on the two-digit LED display ("ITEM"), the function value is displayed on the right-hand LED display ("VALUE").

The way the controller is connected to the LED programming card depends on the type of controller - it varies depending on whether it is a controller with BEC power stabilizer or OPTO controller." When connecting, follow the instructions supplied with the card and your controller.

The list of functions and adjustable values \u200b\u200bis shown on the label on the card; a detailed description of the functions is given in the manuals supplied with the FOXY G2 controllers.

The programming card set contains: FOXY G2 LED programming card, three-wire programming cable, instructions.

Power [V] 4.8 - 8.4
Length [mm] 88
Width [mm] 58
Height [mm] 14
Weight [g] 40
"