FLYFUN-80A-6S-V5

Mid-range Hobbywing controllers for aircraft models. Switched BEC with adjustable output voltage 5.2 / 6.0 / 7.4V 5A permanent, 15A peak. Constant current 80A, peak 100A. Power supply 3-6S LiPol. Weight 90.5g. Dimensions 68.8x34.6x19.2mm.

HW30214201

New product

HOBBYWING

In stock: > 10 pcs
Stores and delivery dates
Price with VAT:
(DPH CZ 21%)
66,60 €
Price without VAT
55,05 €

B B

More info

Recommended for models

More info

The new generation of programmable microprocessor controllers for AC motors without sensors ( "brushless, sensorless") for large and giant recreational and sport aircraft models on battery power Li-poly / Li-ion / Li-Fe. Compared to previous generations of regulators FLYFUN been extended programming capabilities of a number of features that have been proven by top regulators Platinum series. The construction of the controller is into high long-term durability and what is required in giant models. The controller is equipped with a powerful switching BEC power stabilizer with a selectable output voltage providing power receiver and servos (both normal and HV) of the propulsion battery. For easy adjustment controller is a special LED programming box Hobbywing, which is sold separately.

DESCRIPTION AND FUNCTION CONTROLLER

  • Controller equipped with a high performance 32-bit microprocessor M4 ARM clock frequency to 72 MHz; It is compatible with most AC motors.
  • Suitable for the vast majority of aircraft brushless motors with power from the battery 3-6S LiPo / Li-ion / LiFe.
  • Special stabilizer for power microprocessor for high noise immunity and reduce the risk of loss of control.
  • Technology optimized control DEO (Driving Efficiency Optimization) significantly improves the response of the gas and control the power level that reduces the temperature controller.
  • Powerful switched mode power stabilizer BEC output voltage adjustable to 5.2, 6.0 or 7.4 V. The BEC is separated from other circuits of the regulator can maintain a correct functioning even when burning power MOSFET board controller.
  • Acceleration modes Normal / Soft / Very soft is suitable for normal propeller aircraft models with blowers.
  • Simple programming and setup with the transmitter or LED programming box Hobbywing. < / Li>
  • Special programming cable for connecting the controller to the LED programming box allows the user to program the controller anytime, anywhere (see instruction manual LED programming box Hobbywing).
  • Brake Mode Normal / Proportional / Reverse (especially reverse mode) can effectively shorten range after landing.
  • A number of protective functions: protection at startup, electronic thermal control, thermal protection capacitors, overload protection, overcurrent protection, when abnormal supply voltage protection and loss control signal effectively extending the life of the controller.
  • Span gas for the perfect adaptation of the web control signal RC set.

PROGRAMMABLE FUNCTIONS

  • Brake type Brake off, the normal brake (braking with an intensity adjustable in 7 levels) proportional brake (controlled with throttle control: 0-20% throttle displacement corresponds brakes 100-0%, 20-100% corresponds to deflection actuator 0-100 % gas), the reversal (turn allows reversing the engine is running by means of another channel switch).
  • The Power Brakes: The braking intensity is adjustable from Level 1 to Level 7 for the "normal brake".
  • Method of disconnecting the engine: Soft-Off: The controller gradually reduces the power at 50% of full power, within 3 seconds after activation of the voltage protection. Hard off: The motor is switched off immediately.
  • Number of LiPo recommend that you manually set for 100% reliable operation of voltage protection. The controller automatically calculates the number of battery cells connected in accordance with the rules "in Article 3.7" if you choose the automatic detection.
  • Voltage Protection: Threshold voltage protection is adjustable from 2.8 to 3.8 V / cell; Protection can also be switched off completely.
  • Voltage BEC: BEC voltage stabilizer power is adjusted to 5.2 V, 6.0 V or 7.4 V.
  • Accel: Normal start (instant start) Soft start (a slow-start for motors with large propellers, transmission or smaller blowers) Very soft start (with very slow start for motors with large propellers, transmission or blowers 90 mm). < / Li>
  • Timing: adjustable in the range of 0-30 °.
  • Direction of rotation: Clockwise / counterclockwise.
  • DEO freewheel: This function can be switched on or off; may provide better linearity or smoother throttle response.

PROTECTION FUNCTIONS REGULATOR

  • Protection during acceleration regulator during acceleration measured engine speed. If the revolutions stop or increase their growth is not stable, the controller recognizes this as a wrong start. If at this point the gas to less than 15%, the controller will automatically attempt to restart a new engine; If gas is more than 15%, you must download the throttle all the way down to the new engine is restarted.
  • Thermal protection controller motor will be "stutter" if the controller temperature exceeds 110 ° C, indicating that the thermal protection is activated. If at that moment you download the throttle below 60%, "stutter" disappears and the regulator will supply power corresponding to the position of gas. If gas move above 60%, "stuttering" reappears. Temperature controller when switching must not exceed 70 ° C, otherwise you can not start the engine.
  • Protection against loss of signal gas regulator immediately switches off the engine when the signal is missing for 0.25 s to avoid even greater damage and risks resulting from the rapidly rotating rotor or propeller. When there is a normal signal, the controller resumes normal operation.
  • Overload Protection: The controller turns off the engine and restarts automatically when the load suddenly increases to a very high value.
  • Thermal protection: The controller immediately switches off the engine when peak current consumption exceeds the maximum allowed value; then resumes normal operation. If you then current consumption still exceeds the maximum value, the motor is switched off completely.

Tip: When ever you first turn on the regulator first calibrate the extent of gas according to the instructions. Only then you can use the controller and other settings using the LED transmitter or programming card.

Use Plane, helicopter
Type alternate
Continuous current [A] 80
Max. Peak current [A] 100
LiXX Articles 3-6
BEC voltage [V] 5.2 to 7.4
BEC current [A] 8
Length [mm] 69.8
Width [mm] 34.6
Height [mm] 19.2
Weight [g] 92
Regulation unidirectional
Brake Yes
Input for sensors No
programmable Yes

Recommended for models