KAV30.0244
New product
Place to pick up | Delivery |
Store Českobrodska 566, Praha 9, 19800 | 02.04. od 14:30 |
Mode of transport | Delivery |
DPD Private- Delivery to the Czech Republic | 04.04. |
Czech Post | 03.04. |
PPL - Delivery to the Czech Republic | 03.04. |
Zásilkovna | 04.04. |
Balíkovna | 04.04. |
Mode of transport | Delivery |
DPD - Delivery to the Slovakia | 05.04. |
GLS - Delivery to the Slovakia | 05.04. |
PPL - Delivery to the Slovakia | 04.04. |
DPD - Delivery to Germany | 05.04. |
DPD - Delivery to Poland | 05.04. |
DPD - Delivery across Europe | 08.04. |
GLS - Delivery across Europe | 09.04. |
PPL - Delivery across Europe | 09.04. |
Zásilkovna SK - výdejní místa | 05.04. |
Zásilkovna SK - Packeta home | 08.04. |
Zásilkovna PL - na adresu | 08.04. |
Zásilkovna PL - paczkomaty | 08.04. |
Hermes DE - výdejní místa | 08.04. |
Rakouská pošta | 08.04. |
-1,03 €
Availability date:
KAVAN C motors are powerful brushless fourteen-pole electric motors with a rotating casing ("outrunner") with excellent electrical properties, sophisticated construction and excellent production processing. They represent a very good choice for driving your recreational sports models with excellent performance parameters, good efficiency and a favorable price. They are low-speed, high-torque engines that can handle large-diameter propellers and climb without the need for a gearbox.
Engine identification system: CxxYY-zzzz |
C - AC motor with rotating casing ("outrunner", "orbit") |
xx - motor diameter in mm |
YY - motor length in mm |
zzzz - number of revolutions per volt (rpm on V), "KV" |
KAVAN C3530-1400 is an AC motor designed to drive smaller models with a flight weight of up to 950 g, powered by a two-cell or four-cell Li-poly battery. It is excellent for size models such as Easy Glider, etc. - but rather for faster models, which are better evidenced by smaller diameter propellers with higher speeds.
Engine mounting: KAVAN C3530-1400 is designed for front and rear mounting. For front mounting behind the front of the engine, use at least two (opposite) or four M3 bolts that extend into the front of the engine by 4-5 mm. The pairs of holes for the fastening screws at the front of the engine are regularly spaced 180 ° on circles with a diameter of 25 and 19 mm. The engine bulkhead should be made of 3-4 mm plywood. The rear mounting kit (mounting cross, propeller carrier for rear assembly) is supplied with the engine.
Engine set includes: C3530-1400 motor with cables with soldered 3.5 mm gold-plated connectors, rear mounting kit, instructions.
Power supply for LiXX cells | 2 - 4 |
Volt Speed [rpm/ min / V] | 1400 |
Max. power (30 s / 4S LiPo) [W] | 390 |
No-load current (2S) [A] | 1.7 |
Max. peak current (30 s) [A] | 35 |
Diameter [mm] | 35 |
Length [mm] | 30 |
Shaft diameter [mm] | 4 |
Weight [g] | 80 |
Number of poles | 14 |
Timing [°] | 15 - 25 |
Regulator [A] | 40 - 45 |
Glider up to weight [g] | 950 |
Trainer up to weight [g] | 900 |
Acrobat up to weight [g] | 800 |
3D to weight [g] | 700 |
Recommended propeller | 3S: 10x5 ” |
4S: 8x4 ” |