3EA0200
New product
Availability date:
RAY G3 motors are powerful brushless ("brushless") fourteen-pole rotary casing motors ("outrunner") with excellent electrical properties, sophisticated design and excellent manufacturing. They are a very good choice for driving your recreational and sports models with excellent performance, good efficiency and good price. These are high-torque, low-torque, large-diameter propellers and gearless climbs.
Engine Labeling System: CxxYY-zzzz |
C - rotary casing brushless motor ("outrunner", "circular") |
xx - motor diameter in mm |
YY - motor length in mm |
zzzz - revolutions per volt (rpm), "KV" |
RAY G3 C2822-1200
The RAY G3 C2822-1200 is a miniature brushless motor designed to drive small models with a weight of up to 350 g with power from a two-cell or three-cell Li-poly battery. With its help you can successfully "electrify" eg large rubber boots from the Guillow's or Dumas kits with a span of about 800-1200 mm, it is also excellent for RC park-flyers Dumas.
Engine Mounting: The C2822-1200 is designed for both front and rear mounting. For front mounting at the front of the engine, use at least two (opposite) or four M3 bolts that engage in the motor face within 3 - 4 mm. The pairs of mounting bolts for the bolts in the front of the engine are regularly spaced 180 ° on circles of 16 and 19 mm diameter. The engine bulkhead should be 1.5-2 mm plywood plywood. The rear mounting kit (mounting cross, propeller carrier for rear flange) is supplied with the engine.
Engine kit includes: C2822-1200 engine with cables with soldered 3.5 mm gold plated connectors, rear mounting kit, instructions. / p>
Powering LiXX cells | 2 - 3 |
Revolutions per Volt [rpm] | 1200 |
Max. Power (30 sec / 3S LiPo) [W] | 75 |
No-load current (2S) [mA] | 300 |
Max. peak current (30 s) [A] | 9 |
Diameter [mm] | 27.8 |
Length [mm] | 23 |
Shaft Diameter [mm] | 3.175 |
Weight [g] | 34 |
Number of poles | 14 |
Timing [°] | 15-25 |
Controller [A] | 18-20 |
Glider to weight [g] | 350 |
Coach to Weight [g] | 350 |
Acrobat up to weight [g] | 300 |
3D to weight [g] | 250 |
Recommended Propeller | 2S: 8x5-6 ” |
3S: 7x4-5 ” |