3BL2605
New product
Availability date:
The FOXY G3 motors are brushless 14-pole rotary casing electric motors with excellent electrical properties, sophisticated design and high-end manufacturing. Hardened steel shafts and high-quality bearings ensure a long service life, while the quality materials used to make the stator on the rotor also guarantee excellent performance at high efficiency. They are low-speed, high-torque engines that handle large diameter propellers and pitches without the need for gearboxes.
Engine marking system: CxxYY / zzzz |
C - brushless brushless motor ("outrunner") |
xx - stator diameter in mm |
YY - stator length in mm |
zzzz - revolutions per volt (rpm / V), "KV" |
The FOXY G3 C2204-1800 is a miniature brushless motor designed to power small models with a flight weight of up to 250 g, powered by a 2-cell or 3-cell Li-poly battery. With it you can successfully "electrify" rubber bands from Guillow's or Dumas kits with a span of up to about 1000 mm, it is also excellent for park-flyers and indoor aerobatic models.
Engine mounting : The FOXY G3 C2204-1800 is designed for rear mounting with a propeller mounted using a rubber carrier. Use at least two (opposite) or four M2 screws for mounting. The engine bulkhead should be made of 1-1.5 mm aviation plywood. The mounting cross is part of the engine.
Engine set includes: engine FOXY G3 C2204-1800 with cables, instructions.
Power LiXX cells | 2 - 3 |
Revolutions per Volt [rpm / V] | 18 |
Max. power (30s / 3S LiPo) [W] | 90 |
No-load current (3S) [mA] | 700 |
Max. peak current (30 s) [A] | 11 |
Diameter [mm] | 27.8 |
Length [mm] | 24 |
Weight [g] | 38 |
Number of poles | 14 |
Timing [°] | 15 - 25 |
Regulator [A] | 15 - 20 |
Glider to weight [g] | 250 |
Coach up to weight [g] | 250 |
Acrobat up to weight [g] | 200 |
3D to weight [g] | 150 |
Recommended propeller | 2S: 8x4.3 ” |
3S: 6x4 ” |