|Place to pick up||Delivery|
|Store Českobrodska 566, Praha 9, 19800||Mon 18.02. from 14:30h|
|Store OC Lužiny Archeologická 2256/1, Praha 5, 15500||Mon 18.02. from 15:30h|
|Mode of transport||Delivery|
|Gibon delivery - Express delivery Prague||Mon 18.02.17-22h|
|DPD Private- Delivery to the Czech Republic||Tue 19.02.|
|Czech Post||Tue 19.02.|
|PPL - Delivery to the Czech Republic||Tue 19.02.|
|Mode of transport||Delivery|
|DPD - Delivery to the Slovakia||Tue 19.02.|
|GLS - Delivery to the Slovakia||Wed 20.02.|
|PPL - Delivery to the Slovakia||Tue 19.02.|
|DPD - Delivery to Germany||Wed 20.02.|
|DPD - Delivery to Poland||Wed 20.02.|
|DPD - Delivery across Europe||3 - 5 days|
|GLS - Delivery across Europe||4 - 5 days|
|PPL - Delivery across Europe||4 - 5 days|
Warning: Last items in stock!
The new generation of AXI 4130 / xx V2 has higher performance thanks to its sophisticated design, which in conjunction with an integrated cooling system based on the principle of a turbine effect airflow keeps the motor windings cooler by up to 20%. The engine is also due to new store magnets shorter, lighter and mechanically stable.
Robust and reliable high-performance brushless motors AXI 4130 / xx with rotating drum and neodymium magnets have a hardened steel shaft with a diameter of 6 mm mounted in three ball bearings, which ensure very good mechanical stability under normal and inverted mounting and allows high dynamic loads common in aerobatic flying and ensuring a very high durability. Rotors AXI 4130 / xx are exported to most modern dynamic balancing equipment from a reputable company Schenck. High-quality Japanese bearings supplied to the engines of the V2 is characterized by higher durability and quiet operation.
AXI 4130 / xx V2, thanks to its great to torque suitable for large propellers without the need for a gearbox, which ensures high efficiency of the entire drive.
|Labeling system Engine: AXI xxyy / zz|
|xx - stator diameter in mm|
|YY - stator length in mm|
|zz - number of threads|
AXI 4130/20 brushless motor V2 is learned to drive models with a flying weight of up to 6000 g with power from six to osmičlánkového Li-poly battery. Perfect for electrification models designed to drive 10 to 15 cc two-stroke engine (or 15 to 20 cc four-stroke).
Motor mounting: AXI 4130/20 V2 is designed for front and rear mounting. When front mounted behind the front motor using four M4 screws that extend into the front of the engine in the range of 4-5 mm. Motor bulkhead should be from 6-8 mm air plywood. < / P>
Set engine comprising: a brushless motor AXI 4130/20 V2 with cables carrier for fixed pitch propeller, set for rear assembly instructions.
|Power LiXX Articles||6-8|
|The speed at Volt [ot./min/V]||305|
|Number of turns||20|
|Internal resistance [mOhm]||99|
|Load current [A]||1.1|
|max. efficiency [%]||90|
|Current at max. Efficiency (? <82%) [A]||18-40|
|Max. peak current (60) [A]||56|
|Max. power [W]||1650|
|Shaft diameter [mm]||6|
|Number of poles||14|
|The regulator [A]||75-100|
|Glider in weight [g]||7000|
|Trainer to the weight [g]||6000|
|Acrobat in weight [g]||4600|
|3D into the mass [g]||3800|
|Recommended propeller||6S: 18x10 "18,5x12"|
|8S: 15x10-12 "16x10"|