Warning: Last items in stock!
G2 FOXY engines are high-performance brushless (AC "brushless") čtrnáctipólové motors with rotating case ( "outrunner") with excellent electrical properties, sophisticated design and top-notch production processing. Shafts hardened steel and high-quality bearings ensure high durability, quality materials used for manufacturing the stator by the rotor also ensures excellent performance characteristics at high efficiency. These are low speed engines with high torque propeller coping with a large diameter and pitch without the need for transmission.
|Labeling system engines: CxxYY / zzzz|
|C - brushless motor with rotating case ( "outrunner", "outrunners")|
|xx - stator diameter in mm|
|YY - stator length in mm|
|zzzz - the number of revolutions per volt (ot./min/V), "KV"|
FOXY G2 C2826-750 learned a brushless motor drive for models with a flying weight of up to 2700 g with power from a four- to pětičlánkového Li-poly battery. Perfect for models, such as our EPP "warbird" and aerobatic models span of 1300-1400 mm EP Spitfire and Mustang EP from Phoenix like.
The engine casing is provided with a ring with milled grooves for magnets, which reduces the risk of loosening under heavy loads.
Motor mounting: FOXY C2826-750 G2 is designed for front and rear mounting. When mounted behind the front face of the engine, use of at least two (opposite) or rather four M3 screws which extend into the head of the motor in the range of 3.5-4 mm. Motor bulkhead should be from 5 mm air plywood. Location holes for mounting the model in the fastening cross kit rear assembly is identical with the original series motors FOXY C3020 / 3025 (position 2 of the 4 holes for mounting cross on the motor varies).
Set engine includes: FOXY brushless motor G2 C2826-750 cables with soldered 3.5 mm gold plated connectors, carrier for fixed pitch propeller, set for rear assembly instructions. < / P>
|Power LiXX Articles||3-5|
|The speed at Volt [ot./min/V]||750|
|Number of turns||6|
|Max. power (180 s) [W]||590|
|Internal resistance [mOhm]||45|
|No-load current (10 V) [A]||1.4|
|Current at max. Efficiency (?> 80%) [A]||5-15|
|Max. peak current (180 s) [A]||40|
|Shaft diameter [mm]||5|
|Number of poles||14|
|The regulator [A]||45-65|
|Glider in weight [g]||2700|
|Trainer to the weight [g]||2600|
|Acrobat in weight [g]||2300|
|3D into the mass [g]||1500|
|Recommended propeller||4S: 13X6.5 "|
|5S: 12x6 "|