Traxxas Stampede 4WD 1:10 RTR red with LED lighting

Traxxas Stampede 4WD remote control car model. With front and rear LED lighting. Powerful DC motor, waterproof electronics, steering wheel RC set Traxxas TQ 2.4 GHz, fast charge

TRA67054-61-RED

New product

TRAXXAS

DETAIL OF STORES
  • Available in Prague 9 store: 1 pcs
Other options and terms
In store: 1 pcs
Stores and delivery dates
Price with VAT:
(DPH CZ 21%)
354,66 € 295,19 €
Price without VAT
243,96 €

-59,47 €

B B

More info

Recommended accessories

Tuning parts

Spare parts

Telemetry

Wheels

More info


Package contents



The package contains a completely assembled Monster truck Stampede 4WD with installed components: DC motor Titan 550 12T, DC controller XL5 LVD, 3-channel receiver Traxxas TQ 2.4GHz, servo 2056, LED lighting. 2-channel Traxxas TQ 2.4GHz transmitter. Traxxas NiMH battery 8.4V 3000mAh high iD, Traxxas DC-Peak 4A charger with car plug and 12 V car socket connector. Set of Allen keys and wheel nut wrench, washers for shock absorber springs, spare clips. Instructions for use in Czech, manual EN, DE, FR, SP.

Characteristics

TRA67054-61_2.jpg

The RC model Monster Truck Traxxas Stampede 1:10 4WD has all-wheel drive. Waterproof * electronics, driven by DC motor Titan 12T, controller XL-5 LVD. The clear height of 75 mm allows you to overcome even the most difficult obstacles. Model RC set Traxxas TQ 2.4 GHz. Speed up to 48 km / h.

The chassis of the RC model is derived from the proven Traxxas Stampede VXL. The only difference is in the mounting of the engine. The gearbox is only accessible by unscrewing one screw. The new 2.8 "Maxx wheels with a soft foam insert have the excellent grip that is so necessary for monster trucks.

TRA67054-61_4.jpg
Modular chassis design

The model's chassis is built on a modular platform, which increases access to all components and simplifies service. After loosening the five screws, you can extend the entire front. The rear part is also fastened with only four screws.

TRA67010-4_13.jpg
TRA67054-61_21.jpg
LED lighting

The model is newly equipped with front and rear LED lighting, for breathtaking driving day and night. Thanks to this lighting, your model will become a real gem. High-brightness diodes are not only effective, but provide a strong stream of light. The lighting also provides a better overview of the model's position.

TRA67054-61_23.jpg
Innovative chassis

The model's chassis is designed to absorb shocks and remain stiff in all circumstances. All components are integrated into the chassis have a designated place.

TRA67010-4_19.jpg
Receiver box

The receiver box is equipped with a sealing O-ring that keeps the splashing water after passing through the puddles and mud away from the receiver electronics.

TRA67010-4_18.jpg
Wheels and tires

The 2.8 "All-Star chrome spoke wheels keep the tires securely on the rim thanks to a special rim. Chevron Maxx tires with a soft compound allow maximum traction in the field, while on hard surfaces they allow adequate slip.

TRA67010-4_17.jpg
Oil shock absorbers

Ultra Shock long stroke oil dampers are designed to absorb every impact. Double X-rings ensure smooth operation without oil leakage. The properties of the shock absorbers can be changed by preloading the springs or by replacing the springs with others, and the behavior of the shock absorbers can also be adjusted by changing the viscosity of the oil used.

TRA67010-4_10.jpg
Front and rear differential

The front and rear differentials distribute power between all wheels. The differential housings are mounted in bearings and the differential gears are made of metal for even greater durability. You can change the differential lock by filling the differentials with oil of different viscosities.

TRA67010-4_8.jpg
Precise control

The mechanics of turning the front wheels are implemented through the Dula-Bell-Crank system, which ensures precise movement of the drawbars to the wheels. The steering has an integrated shock-absorbing servo saver and protects the servo against overload.

TRA67010-4_9.jpg
Friction clutch

The friction clutch protects the entire drive against shock during acceleration. The clutch with friction plate and lamellas can be easily adjusted with a nut so that the start is smooth, agile and at the same time all parts are protected against strong engine engagement.

2056_waterproof_servo.jpg
Power steering

Traxxas servo 2056 6.2kg.cm waterproof digital servo with DC motor and nylon gears has a torque of 6.2 kg.cm and a speed of 0.20 s / 60 ° @ 6.0 V. For water resistance *, the servo box is fitted with a seal.

3785_titan_12T.jpg
Powerful Titan 12T engine

The car model is equipped with a modified DC motor Titan series 550 12T. The engine has 30% more power than conventional 540 engines. The rotor at the rear of the engine contains a propeller that blows air into the engine and effectively cools it.

3018R-XL-5-wires-2-2014.jpg
Electronic controller Traxxas XL 5

Waterproof * electronic controller Traxxas XL-5 with three driving modes, support for modern high-capacity LiPo batteries and easy operation with the EZ-Set ™ button. The XL-5 controller is equipped with a training mode that limits full throttle to 50%. Thanks to this, novice drivers or children can gradually get acquainted with the features of the model and prepare for the full power of the car. Thermal protection, gold-plated connectors and incredibly low internal resistance are the motto of this controller.

XL controller modes 5
  • Sport : Default mode, forward, braking and reverse are possible.
  • Race : A mode suitable for racing. Forward driving and braking are possible; reverse is not available.
  • Training : A mode suitable for children or beginner riders. It is possible to drive forward with a power limitation of 50%, brake and reverse travel again with a power limitation of 50%.
TRA6519.jpg
TQ receiver

The three-channel Traxxas TQ 2.4 GHz receiver ensures safe control without outages. Easy one-button pairing. Status indication by LED diode.

6516-TQ.jpg
RC set Traxxas TQ

The model is controlled by a two-channel proportional steering wheel RC transmitter Traxxas TQ, operating in the 2.4 GHz band - operation without interference. The transmitter is powered by only 4 AA cells.

There is a rotary knob on the transmitter that trims the steering wheel (so the model is straight when the steering wheel is in the center position). The indication of the battery status in the transmitter is indicated by an LED diode. The transmitter can be set to reverse the throttle and control channel (if you would like to use the transmitter to control other models).

2975.jpg
Fast charger with automatic 12 V

The package includes a fully automatic fast charger for NiMH batteries at 12 V with a connector to the car socket. The charger allows you to charge 6 to 7-cell NiMH batteries with a charging current of up to 4 A. Charging is completed by the Delta Peak method.

A 12 V mains adapter with car socket is available as an option.

Properties
  • Newly equipped with LED lighting
  • Completely assembled and ready to ride
  • Speed up to 45 km / h
  • Powered by a powerful DC motor Titan 12T, 4WD drive
  • Waterproof * regulator and servo
  • Regulator compatible with two LiPol batteries
  • NiMH battery 8.4 V 3000 mAh with new ID connector
  • Quick charger with automation and 12 V car socket connector
  • Maxx Chevron licensed tires
  • Complete equipment with ball bearings
  • Metric Allen screws for easy maintenance
  • Ultra Shocks high volume shock absorbers
  • Possibility of tuning
  • The model is ready for upgrade to AC drive.

* For information on water resistance specifications, refer to the operating instructions. Tips and tricks for operating in a wet environment can be found in the blog.

TRA67054-61_1.jpg

We recommend buying

To put the RC model into operation, you need - 4x AA batteries for the transmitter. The package contains a set NiMH charger for 12V DC with an auto-plug. To power the charger from the 230V network, it is necessary to purchase an additional - Traxxas power supply.

battery.jpg
Recommended spare batteries

To extend the driving time, we recommend purchasing an additional battery. For normal riding and for children, we recommend purchasing another identical NiMH battery, which is part of the package. You can use modern LiPo batteries for maximum driving time and higher performance. If you use different types of batteries, it is always necessary to set the type of connected battery on the controller!

  • For normal riding NiMH battery Traxxas 8.4 V 3000 mAh (high).
  • For normal driving with a longer driving time NiMH battery Traxxas 8.4 V 5000 mAh (high).
  • For maximum driving time LiPo battery Traxxas 7.4 V 5800 mAh.
charger.jpg
Recommended Traxxas chargers

Traxxas universal chargers can be used to charge Traxxas LiPo and NiMH batteries. (The charger included in the package is only for the NiMH battery included in the package.) Traxxas chargers are a simple and safe way to charge the batteries. Traxxas uses the unique iD system , so you can always be sure that you can connect everything easily and safely. There is an integrated chip in the battery connector, which the Traxxas charger automatically recognizes and sets all battery charging parameters for you. More information here.

Universal chargers for batteries up to 3S LiPo and NiMH

  • Traxxas EZ-Peak 50W mains charger with one output
  • Traxxas EZ-Peak 2x50W mains charger with 2 outputs
tools.jpg
Accessories for normal operation

For normal operation of the Traxxas RC car, you need screw glue, high-quality tire glue, silicone shock absorber oil and a set of screwdrivers. From our range we recommend an affordable set of tools for cars.

The screw glue drips the thread or the head of the screw, which fixes it and the vibrations caused by driving do not allow the screw connection to loosen. The screw adhesive has a special composition that allows the screw connection to be easily loosened with a reasonable torque without damaging the screw head. Never use ordinary instant glue, it could be impossible to loosen a screw glued in this way at all!

The tire glue adheres the tires to the rim of the disc. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not stuck around the entire circumference, it may rupture. The tire adhesive has a special composition that is able to bond materials such as rubber or nylon, and at the same time the adhesive is flexible after hardening. Never use ordinary instant glue - it is not flexible after hardening and cracks in the tire would gradually form around the rims!

Occasionally it is necessary to add silicone oil to the model's shock absorbers. During normal operation, there is only a slight leakage of silicone oil along the shock absorber piston rods. If the damper piston rod surface or seal condition is in poor condition, the oil leak may be large. So-called repair kits are supplied for these cases. In the range of tuning parts, piston rods with an extremely hard TiN (titanium nitride) coating are supplied with all shock absorbers. TiN-coated piston rods are easily recognizable by their golden-green color.

Recommended accessories

Tuning parts

Spare parts

Telemetry

Wheels