KAVAN Power CA 20g thin instant glue (DE)

Excellent thin instant glue, solid bond 1-5 s. For gluing wood, metals, most plastics incl. EPP/EPO (not suitable for polystyrene foam, polyethylene and Teflon). Packaging: 20g bottle.


New product


In stock: > 10 pcs
Stores and delivery dates
Price with VAT:
(DPH CZ 21%)
2,33 € 2,25 €
Price without VAT
1,86 €

-0,08 €


More info

Recommended accessories

Recommended for models

More info

Thin instant (cyanoacrylate) glue for modeling and general use. It comes in a bottle with an applicator tip.

The thin instant glue with low viscosity is ideal for gluing non-absorbent and absorbent materials that adhere perfectly to each other - a typical use is, for example, gluing RC car tires to rims. Glues wood, most plastics, metals, rubber, glass, ceramics, cork, paper...

Typical method of application: The glue is applied to the joint of perfectly aligned parts attached to each other.


  • Color: clear
  • Viscosity: 14-40 mPa.s
  • Density: 1.04 g/cm3
  • Optimum temperature for application: 23 °C
  • Curing time (depends on the temperature and nature of the bonded materials): 3-20 s
  • Full curing: 24 h
  • Optimal gap width between glued parts: zero
  • Cured glue is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator: KAV56.9958.CZ Activator CA 150ml, KAV56.9959.CZ Activator CA 200ml spray, KAV9977 KAVAN PRO activator CA spray 150ml.

Recommended peeler/debonder: KAV9979 KAVAN peeler CA 20g

Removing excess uncured glue: a cloth or paper towel moistened with KAV9979 CA releaser or acetone (if the bonded materials can withstand it).

Thinning the glue: If the instant glue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no amount of "thinning" can bring them back. If you need a "thinner" super glue, just use a lower viscosity type. Individual types of POWER CA instant glues can be mixed together to achieve optimal viscosity.

Use as sealant, suitable fillers: microballoon filler KAV9980 CA KAVAN filler.

Suitable for bonding: soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, many plastics (including EPP and EPO).

Not suitable for gluing: polystyrene foam, polyethylene, Teflon, silicone.

Storage: in tightly closed packaging, in a cool, dry and dark place (at a temperature of +2°C to +10°C). Do not expose to temperatures below +2°C.

Durability: If the conditions of proper storage are observed, we guarantee durability in unopened original packaging for a period of 1 year while maintaining the above-mentioned product properties.

The product contains substances classified as dangerous in the sense of Regulation (EC) No. 1272/2008. For detailed information, see the "Downloads" section.

Recommended accessories

Recommended for models