Absima CR4S 2.4GHz four-channel RC kit

RC set Absima CR4S 2.4GHz AFHDS ANT
Four-channel RC set lower middle class operating in the 2.4GHz band. For the 1st and 2nd channel (control and throttle) it is possible to quickly set the reverse deflection, trim and deflection magnitude. For channels 3 and 4, the amount of deviation can be changed programmatically. The fourth channel is controlled by the button switch - after pressing the button the function is permanently switched on (it is not necessary to keep the button pressed permanently ), by pressing the button again the function is switched off. The third channel is controlled by a three-position switch with center / neutral position, ideal for controlling eg a winch . The transmitter is equipped with a simple program menu in which it is possible to set / model speed to 50%. The receiver is equipped with a safety function Failsafe, which in case of loss of the signal from the transmitter sets the servos and the controller to a pre-programmed position (this will prevent accidental passing of the model and a possible accident).

Control of individual channels:
Channel 1 - steering wheel, Trim, Reverse_ and EPA functions available
Channel 2 - accelerator / brake, Trim, Reverse and EPA functions available
3 . channel - three-position on-off-on switch (ideal for controlling eg winch, full deviation -100% - 0% - + 100%, can be programmatically limited)
Channel 4 - pushbutton switch (on / off, full deviation -100% - + 100%, can be programmatically limited)


Technical parameters of the Absima CR4S transmitter:
- 2.4GHz AFHSS ANT modulation with frequency band hopping
- possibility to limit deviation endpoints for all channels
- mechanical trims for gas and control, electronic for channels 3 and 4.
- setting reverse deflection for channel 1 and 2
- low voltage indication of the transmitter
- transmitter supply voltage 4.8-7.4V (possibility of 2S LiPo supply)
- Beginer mode for beginners, limits power / speed to 50%
- safety functions of the receiver Failsafe

Technical parameters of the Absima R4WP Micro receiver
- frequency 2.4GHz AFHSS ANT
- number of channels: 4
- supply voltage 3.5-8.4V
- weight 5g
- dimensions: 31x18x13mm
- compatible only with Absima CR4S transmitter

Package includes CR4S transmitter, R4WP Micro receiver, instructions