Traxxas TRX-4 Land Rover Defender 1:10 RTR Blue

TRX-4 chassis

The chassis is built of two steel profiles, which ensure sufficient rigidity of the chassis. Thanks to the engine located in the front part, a sufficient load on the front wheels is ensured, so that the model can easily drive even on steep slopes. The battery is located in the axis of the chassis, so the model is precisely balanced and does not tilt while driving.

To reduce maintenance, the lower part of the chassis is fitted with covers which, together with the fenders (which are part of the body), prevent excessive dirt from entering the chassis of the model.

Axles with axle gearbox

The TRX-4 chassis uses gantry axles with an axle gearbox. The axle transmission increases ground clearance, reduces stress on differentials, transmissions, cardan shafts and further reduces torsional force - the model tilts less.

Turning of the front wheels is possible by an angle of 45 °, steering is provided by a Traxxas 2075X servo with metal gears. Thanks to the new chassis, the model achieved a great approach angle.

Two-speed transmission

The model is equipped with a two-speed transmission. The gear change is controlled by a red rocker switch on the transmitter. This solution makes the TRX-4 a very versatile model that can drive slowly and quickly - as you need .

Lockable differentials

The differential locks are independently controlled by 2 servos. Power from the servos is transmitted via cables to the differentials. The shutters are controlled by a three-position switch on the transmitter and provide the following combinations:

• Both differentials are open
• Only the front differential is closed
• Both differentials are closed

Detailed processing

Great emphasis was placed on detailed workmanship - as usual, the model is officially licensed by Jaguar Land Rover. In addition to the detailed body with accessories, the model has functional fenders, detailed wheel suspension. LED lighting can be added as an optional accessory.

DC regulator

The heart of the Traxxas model is the XL-5 HV DC electronic controller. The controller is designed to be powered by a 2-cell or 3-cell LiPo battery. The model can also be powered by 6-7-cell NiMH batteries. Easy selection of driving modes and other settings, using the EZ-SET button. Indication of the controller status by an LED diode. LVD protection against LiPo battery undercharge. Thermal protection. Water-resistant * construction.

The Traxxas XL-5 HV controller supports 5 driving modes:

1. Sport : Driving forward, brake and reverse
2. Race : Driving forward and brake. Reverse is not available
3. Training : Forward travel limited to 50% power, brake 100% and reverse limited to 50 this mode is suitable for children
4. Trail : Forward, brake, reverse. The control near neutral is very fine
5. Crawl : Drive forward, brake in neutral and straight reverse.

Titan 21T engine

The model is powered by a Titan 21T 550 DC motor. The motor provides smooth operation from low revs. For better cooling, a motor is integrated in the motor, blowing air to the rotor.

Servo control

The model is controlled by a digital servo Traxxas 2075X high-torque, with a torque of 9 kg.cm. The servo is equipped with two ball bearings on the square shaft and metal gears for maximum durability. Waterproof * construction.

Four-channel RC set Traxxas TQi with Bluetooth

The four-channel RC set is, in addition to precise and reliable control, also equipped with a slot for placing a Bluetooth module (sold separately TRA6511). The Bluetooth module allows you to connect the RC model with the clear graphic application Traxxas Link, which you can install on your Smartphone free of charge.

The Traxxas Link app for Apple devices is available for free on the AppStore , the app for Google Android devices is free on GooglePlay .

The Traxxas Link App is a powerful application that gives you complete control over the operation and tuning of the Traxxas RC model with stunning visualization and absolute setting accuracy. Traxxas Link displays real-time telemetry data, measures speed, rpm, battery voltage temperature and model tilt. You can share the settings of RC models, you can create any number of profiles for a specific track or user, eg children. Everything in an application with brilliant graphics, which is a matter of course from Traxxas.

To obtain telemetry data, it may be necessary to install telemetry sensors (depending on the model type). More information about the application and telemetry options here.

Telemetry

Using the TRA6511 wireless Bluetooth module (sold separately) and the Traxxas link app, it is possible to monitor the tilt of the model on your phone. To display additional telemetry (battery voltage, speed, temperature) it is necessary to install telemetry sensors.

Traxxas TQi receiver

RC receiver Traxxas TRA6533 for Traxxas TQi transmitters. Easy operation, pairing with a button. LED status indication. 3-axis MEMS sensors are integrated in the receiver to learn the position of the receiver.

The 5-channel receiver is also equipped with two connectors for connecting RPM (speed) and I / O (voltage / temperature) telemetry sensors.

Furthermore, an extension telemetry module can be connected to the 4-pin connector, to which you can connect up to 6 other sensors, including a very accurate GPS speed sensor.