LOS03030T1
New product
Place to pick up | Delivery |
Store Českobrodska 566, Praha 9, 19800 | 03.04. od 15:00 |
Mode of transport | Delivery |
DPD Private- Delivery to the Czech Republic | 05.04. |
Czech Post | 04.04. |
PPL - Delivery to the Czech Republic | 04.04. |
Zásilkovna | 05.04. |
Balíkovna | 05.04. |
Mode of transport | Delivery |
DPD - Delivery to the Slovakia | 08.04. |
GLS - Delivery to the Slovakia | 08.04. |
PPL - Delivery to the Slovakia | 05.04. |
DPD - Delivery to Germany | 08.04. |
DPD - Delivery to Poland | 08.04. |
DPD - Delivery across Europe | 15.04. |
GLS - Delivery across Europe | 09.04. |
PPL - Delivery across Europe | 09.04. |
Zásilkovna SK - výdejní místa | 08.04. |
Zásilkovna SK - Packeta home | 08.04. |
Zásilkovna PL - na adresu | 08.04. |
Zásilkovna PL - paczkomaty | 08.04. |
Hermes DE - výdejní místa | 08.04. |
Rakouská pošta | 08.04. |
-37,01 €
Availability date:
Completely assembled RC model car Losi Hammer Rey U4 with installed components: Spectrum motor AC Company 3660 3150rpm, Spectrum Smart regulator AC 130A 2-4S, Spectrum receiver 6200A DSMR AVC, Spectrum servo S614S MG (steel) WP 23T. The Spektrum DX3 Smart DSMR transmitter is included, instructions in Czech, manual EN, DE, FR, IT.
The RC model car Losi Hammer Rey U4 in 1:10 scale in the official license is a car for all terrain. It can handle rocky and sandy terrain. Hammer Rey is ideal for all off-road enthusiasts looking for a top RC experience. AVC driving stabilization , AC drive.
Losi® Hammer Rey® SMART is a fun car for any terrain, for everyone who likes to ride in Rock Racer style. The model is officially licensed by Casey Currie's U4 Racer. It is powered by a Spektrum ™ Firma 3150Kv AC motor with a Spektrum Firma® 130A BL controller, a 6-channel DSMR AVC / telemetry receiver and a new DX3 transmitter that provides Spektrum Smart feedback, including instantaneous battery voltage. Along with the officially licensed Hammer Rey design, it features KMC wheels, Nitto tires and other details such as new damping tanks, fire extinguishers and new light ramps. It is equipped with a fixed rear axle, independent front suspension and oil dampers, so you can penetrate all types of rocky terrain. And you can go full throttle, which you can only use with AVC® technology. Hammer Rey is ideal for all off-road racers looking for a top RC experience with AVC electronic stabilization options and a three-position limit switch. With the Hammer Rey RC car, Losi continues to push the limits, quality of detail, performance and officially licensed products.
The RC model Hammer Rey U4 is manufactured under the official license of Casey Currie's U4 Racer. It contains authentic model details of a real Hammer Rey car, and the model is therefore a faithful replica, made in a 1:10 scale.
The model is built on licensed KMC Machete racing discs and Nitto Trail Grappler M / T tires with an aggressive tread pattern that can handle any terrain. Hammer Rey therefore has the exact look of a real machine.
Hamer Rey is equipped with a Spektrum ™ 3150Kv AC motor, a Spektrum ™ Smart 130A controller and is controlled by a 6-channel AVC Spektrum ™ SR6200A DSMR telemetry receiver, which transmits Spektrum ™ Smart telemetry data, including instantaneous battery voltage. This powerful combination handles up to 3S LiPol batteries (sold separately) and allows you to rush the landscape at speeds of more than 60km / h!
The Spektrum ™ DX3 ™ transmitter, which is part of the set package, offers advanced functions such as AVC® technology with transmitter telemetry, indicating the capacity status of the Smart drive battery. Excellent range, response and interference immunity with the exclusive Spektrum DSMR technology. Setting of control and throttle endpoints, setting of four levels of LED brightness, which signal the level of the SMART battery.
Losi Hammer Rey U4 is equipped with secondary silencers with artificial cooling tanks, fire extinguishers, Magnaflow exhaust system, upper LED light bar, lower LED light bar, LED headlights, fuel cell, artificial swing rod, brake calipers with discs, side mirrors and more.
To ensure the rigidity and accuracy of the steering together with higher safety, the steering servo holder and servosaver with a gear mechanism were modified.
The rear suspension of the Hammer Rey RC model allows you to absorb massive unevenness and bumps while driving as realistically as in the full-fledged off-road racing car U4. The rear axle housing contains a third section that has new pinion bearings with a larger diameter as well as a firmer upper rear arm mount for greater durability.
The front independent suspension has been carefully designed, so the Hammer Rey can now safely traverse difficult terrain. With a fully independent suspension, it allows each side to respond accordingly and provides more control and more precise steering and control.
The Hammer Rey RC model has waterproof electronics components such as servo, controller and receiver. It is recommended to perform a regular inspection of the engine, as the engine contains rotating parts that need to be cleaned and preserved regularly. But it will reward you with longevity and consistent performance.
The motor is mounted on an aluminum motor bed with a series of marked holes that allow you to easily precisely adjust the interdental clearance of the gears for different pinion sizes.
The fun with Hammer Rey doesn't end even when the sun goes down. Brilliant LED lights on integrated light bars provide more than enough lighting for night driving. In addition, body-mounted LEDs are very battery-free, allowing you to drive late into the night!
Long-stroke shock absorbers do a fantastic job of absorbing energy during large bumps and jumps. The threaded bodies of the shock absorbers are equipped with adjusting sleeves, so you can fine-tune the preload setting of the coil springs.
Hammer Rey has a high-torque servo S614S MG (steel) WP installed, with a torque of 15kg.cm and a 23T square.
The single-speed transmission, as well as the front and center differentials, are weather-sealed and designed to handle the use of a high-performance AC motor in difficult terrain. M1 gears further increase durability. The three differential options allow you to adjust your Hammer Rey to handle any track conditions.
The innovative rear battery insertion function allows the battery to be replaced quickly, easily and without inconvenience when removing the body. Now all you have to do is slide the battery under the rear axle into the box and secure it against sliding out.
The longest wheelbase so far has been used on the Rey platform to provide greater stability at high speeds, which, in conjunction with the work done by the AVC's electronic stabilization, will allow the throttle lever to be pushed all the way in. Enjoy a predatory off-road ride with the Losi Hammer Rey U4.
The receiver's integrated AVC® (Active Vehicle Control®) traction control system works behind the scenes and performs hundreds of throttle and steering adjustments per second, so more engine power is transferred to current speed and acceleration, instead of just raking the wheel. The patented AVC system gives a higher level of performance that you simply will not find in any car model from a manufacturer other than Horizon Hobby. As well as traction control in your full-fledged vehicle, you can activate or deactivate the system during operation and adjust the stability level according to driving conditions. Every RC car can drive faster and with AVC you can drive faster while maintaining optimal stability in all driving conditions.
American racing driver Casey Currie is a successful and well-known figure in off-road racing. One of the reasons Casey Currie and his U4 race car work so well on the Rey platform was the independent front axle suspension and fixed rear axle. This combination was also used in the RC model and is great, performance and driving characteristics will not disappoint you.
To put the model into operation, 4x AA batteries are needed for the GP SUPER transmitter, alkaline battery LR6, LiPol 2S Spektrum Smart LiPo 7.4V 5000mAh 50C HC IC5 or LiPol 3S Smart G2 LiPo 11.1V 5000mAh 50C HC IC5 battery and an adequate battery charger. .
The model can be operated on a 2 to 3 cell LiPo battery. The battery should be equipped with an EC5 or IC5 connector. We recommend a 2-cell LiPol battery (7.4 V) for normal riding.
Spektrum batteries with SMART technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here
Smart G2 batteries are even simpler and safer, thanks to the absence of a balance connector. In addition, G2 batteries have up to 3x faster automatic discharge into storage mode. Smart G2 batteries can only be charged on Spektrum Smart and Smart G2 chargers .
Spektrum Smart chargers can charge both Smart and Smart G2 batteries as well as conventional batteries. Previously sold Smart chargers, after the upgrade, also support Smart G2.
To connect the battery to the above-mentioned chargers, you need an IC5 / IC3 charging adapter.
For normal operation of the Axial RC car, you need tire glue, bolt glue, a tool kit and silicone shock absorber oil. From our range we recommend an affordable set of tools for RC cars.
The tire glue adheres the tires to the rim of the disc. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not stuck around the entire circumference, it may rupture. The tire adhesive has a special composition that is able to bond materials such as rubber or nylon, and at the same time the adhesive is flexible after hardening. We recommend Robitronic Tire Glue from our offer.
Sometimes it is necessary to add silicone oil to the model's shock absorbers and change the oil in the differentials. During normal operation, there is only a slight leakage of silicone oil along the shock absorber piston rods. If the damper piston rod surface or seal condition is in poor condition, the oil leak may be large. Repair kits or individual parts are supplied for these cases.
Screw glue is required for routine maintenance. Screws screwed into the metal material (eg screws in the motor, pin in the pinion) must be secured against loosening with this adhesive.
Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity for long travel times. On the contrary, the LiPo battery is particularly susceptible to mechanical damage.
Carry the RC model comfortably and safely in a Robitronic carrying bag. The bag is airtight and has an elastic edge that can be adjusted to the model. Thanks to the Velcro strap, the model is easy to carry. The synthetic material can be easily cleaned with water or soap suds if required.