PIONEER ARF

PIONEER is not only an excellent school model for beginners, but also an excellent "traction horse" for relaxing flying pleasure - easy to use, stable - yet capable of basic acrobatics. Large bearing surfaces, low flight weight and a reasonably efficient AC motor are typical attributes of a good training model. The semi-symmetric wing profile also guarantees excellent performance even on back flight. Functional "bombers" allow you to bring parachutists or candy "bombs" - the days at the airport with your candy barber will never be boring!

The fuselage EPP model fuselage is supplied with a rotary casing AC motor fitted with a 40 A AC servo controller and rudder, elevator, and bayonet door controls. At the front of the fuselage in front of the cab, under the removable cover there is a battery compartment; The space for the receiver is under the wing. For PIONEER, you will need Li-poly triacs of at least 1800 mAh with a 15C capacity, but also "take" even larger ones of 2200 mAh, with which the flight time is prolonged. If you use the 20 or 25C load kits, the model naturally gets even better and better "going behind the propeller". Under the wing, there is also a large "bomb bay" with a plastic door closed and opened by a servo mounted on the side of the hull. It can be used to carry paratroopers or a drop of candy, paper confetti, etc.

Tail surfaces are EPP and are removable for easy transport and storage - screwed to the fuselage.

The wing with semi-directional EPP foam profile is two-part, connected by a square tubular carbon clutch and a large-area plastic "clip". The wing is fastened to the wing by polyamide screws that "cut" in the event of a violent collision in case of a crash, thus reducing the risk of damage to the model." Ailerons are controlled by two servos stored in the wing. Prior to attaching the rods, we recommend that all rudders "move" repeatedly with cautious upward and downward deflection, respectively. Left and right.

The landing gear consists of a three-wheeled chassis with a manageable bow leg and a main duralumin chassis attached to the fuselage by bolts.

To control the model, you will need at least a four-channel RC kit, such as CADET 4 2.4GHz. In that case, both aileron servos are connected to a single channel via the Y-cable (not included in the kit); The bomb will not work. Ideal if you have at least a 5-channel RC kit that allows independent control of the aileron servos, and has a channel controlled by a jumble switch. In this case, you can also adjust the slight differentiation of aileron deflections; We recommend a 10-20% downward deflection of the aileron downwards compared to the upward displacement - this model with a half-directional profile wing facilitates a coordinated curve through the curve. Because of the low surface load, it is of little importance to attempt to mix the wings as flaps or brakes.

Pioneer is designed for beginners (under the supervision of an experienced pilot), will delight pilots who have already mastered the school model, such as our BETA 1400 - and will not disappoint any recreational flight. You will learn the right coordinated control of the model with a rudder, ailerons and an elevator, and enjoy the basic acrobatics including flying back! It will be an excellent preparation for real acrobatic models - like our SCOUT.

ARF kit includes: finished model with alternating motor, speed regulator and 4 servos, 10x5 "propeller with cone, duralumin main chassis with wheels, stick sticker, building instructions.

Drive and RC equipment: