55820 Přijímač RX-9 DR compact M-LINK 2,4GHz

Double (diversity) devítikanálový 2.4 GHz FHSS receiver system MULTIPLEX M-LINK transmission of telemetry, thanks to built-in preamplifier extended range (significantly exceeds the range of ordinary 2.4GHz receivers) and increased supply voltage range (4-6 Ni-xx, Li 2s poly). Using M-LINK transmission technology provides high noise immunity and the ability to set the emergency deflections (fail-safe) in case of failure or strong interference signal transmitter.

Determine the receiver is for general use in models of all categories; its compact size, low weight and connectors zasouvaným longitudinal axis is particularly suitable for models with a slender fuselage, such as gliders F3B, F3J like. For slender hulls is also advantageous pair of antennas with the leads of different lengths.

RX-9-DR M-LINK Compact circuitry includes two receivers with special antennas that operate in parallel, which ensures correct installation of antennas (mutually perpendicular) to the high reliability of transmission control signal regardless of the relative position of the transmitter and the model. Use of diversity # 85070 cable, it can be connected to the "tandem" with any M-LINK MULTIPLEX receiver allowing "dvoupřijímačový" operating mode. Then connect the receiver to the board model working together, the servos are always transmitted signal from the receiver with the best quality reception. So you can easily implement system-board quad diversity to ensure ideal reception conditions and thus eliminate the influence of directivity receiver antennas. You will enjoy a hitherto unknown level of transfer security control signal for large and fast models of airplanes and helicopters.

RX-7-DR M-LINK Compact also has the option to output servo signals transmitted to other devices, such as control units for Flybarless helicopter or multikoptéry in serial form via a single cable system SRXL-MULTIPLEX. This greatly simplifies board installation, eliminating the number of connecting cables. Note .: The receiver can operate in either mode dvoupřijímačovém or serial servo output - both at the same time is not possible.

Pairing with a transmitter and setting the fail-safe emergency deflections is carried out via the programming SET button on the receiver operating states are indicated by LEDs.

The receiver is equipped with a data socket for connecting external sensor modules (up to 16 modules interconnected in series) telemetry for transmission to the transmitter.

When using a PC connection cable and PC # 85149 MULTIPLEX Launcher program (free download at the website MULTIPLEX) or Programmer # 82094 MULTImate can adjust emergency deflection Fail-safe individually for each channel. It can enable the combined settings common for helicopter models - in case of emergency, the gas down on idle while the other servos maintain the last correct position, thereby reducing the risk of sudden "jump" collective and cyclic control after the restoration of normal income.

When using a PC connection cable # 85149 and PC program MULTIPLEX Launcher can also update the receiver's software, examine in detail the counter error conditions (which detects a power failure and reception) and assign addresses for external telemetry sensor modules (being one of the addresses can be set as a priority - the value of it will be to the transmitter wander more often than other sensors, so that the selected value will be fresher, without delay) and switch dvoupřijímačový operating mode or operation with serial servo output.

Allows connection stabilization system MULTIPLEX WINGSTABI.

Receiver RX-9-DR M-LINK is equipped with jacks for standard connectors UNI (= JR / Graupner, Hitec).