RAYTRONIC C14 + 80W charger

Microprocessor quick charger with balancer for 1-15 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / LiFe, LiHV, 2-20V Pb current 0.1-6A (max. 80W). Discharge max. 2A (max. 10W). Power supply 11-18V / 230

3EC1014

New product

RAY

Sale ended

More info

Recommended accessories

More info

The Raytronic C14 + 80W has been designed to provide everything you need to charge "under one roof", including a power supply, and is easy to operate. RAYTRONIC C14 + allows to charge and discharge common types of cells (NiCd, NiMH, LiPo, LiHV, Li-ion, LiFe, Pb), and is equipped with a built-in six-channel balancer, which ensures very safe and comfortable charging of lithium batteries.

In addition to conventional 50W chargers, apart from higher performance, it is truly intelligent software that enables the functions of the “machines” of much higher price categories:

  • setting of end voltage for charging and discharging for lithium (allows for more gentle charging, which the pilots like, or vice versa brutal overcharging, which is held by “wheelchair users”) and lead-acid batteries
  • Measurement of total and individual cell voltages (for lithium accumulators), also outside charging / discharging
  • Measurement of internal resistance of individual cells (for lithium batteries)
  • current source mode with adjustable voltage limitation (max. 6 A / 80 W)
  • Smart battery charging mode (lithium batteries with built - in protection electronics)

Overview of basic functions and parameters

  • Input power supply voltage 11 - 18 V DC
  • Mains supply 100-240 V / 50-60 Hz
  • For charging and discharging 1 - 15 NiCd / NiMH cells, 1 - 6 Li-ion / Li-poly / Li-Fe cells or 2- 20 V lead-acid batteries
  • Adjustable charging current (0.1 A - 6.0 A)
  • Adjustable discharge current (0.1 A - 2.0 A)
  • Max. power for charging 80 W, for discharging 10 W
  • Automatic charging and discharging mode for NiCd, NiMH with adjustable current limit
  • Charging termination with delta-peak automatic for NiCd and NiMH batteries
  • Lithium and Pb accumulators are charged by the constant current / constant voltage method
  • Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
  • Adjustable charging and discharging end voltage for lithium and lead acid batteries
  • Repeated cycling operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
  • Four charging modes for lithium batteries - normal charging, fast charging, balancer charging and storage charging / discharging
  • Stop charging when the set time, charge or limit temperature is exceeded. < / li>
  • Memory for 20 charge / discharge programs.
  • Measurement of total voltage of the set and individual cells (for lithium batteries)
  • Measurement of total internal resistance of individual cells (for lithium batteries)
  • Socket for temperature sensor
  • Autonomous balancer mode for lithium batteries
  • Current source mode with adjustable voltage limit for powering other devices - max. 6 A / 80 W, max. Voltage 27 V
  • Smart battery charging mode (lithium battery with built-in protection electronics) with adjustable charging time, charging current and max battery voltage
  • Two-line backlit LCD display with simple and clear menu and parameter display during charging / discharging
  • A number of warning text messages contribute to safe operation - incorrect input voltage, wrong connection, unsuitable battery or condition, incorrect polarity at the output
  • Protection against polarity reversal and short-circuit at the output.
  • Compact aluminum cabinet, small size
  • Built-in power supply.

If you also connect the rechargeable lithium battery via the service connector, you can monitor the voltages on each cell throughout the charging or discharging process and the built-in balancer balances the voltages on each cell. the charger is equipped with JST-XH service plugs, and additional system kits can be connected using adapters sold separately.

A temperature sensor can be purchased to measure the temperature of the charged / discharged batteries.

Note: The lead-acid battery charger allows you to set a final voltage of 1.50-2.50 V / cell - for this reason it is suitable (when set correctly) for charging gas-tight gel batteries that must not be charged to more than 2.30 V / cell, as well as conventional lead-acid batteries (car batteries) and gel batteries with reversible valve. < / p>

Charger set includes: RAYTRONIC C14 + charger, mains cable, 12 V power cord with crocodile clips, Dean-T charging cable with adapters with JST-BEC, JR / Futaba connectors, with crocodile clips and for compact glow plugs, instructions.

Input voltage (car battery - DC) [V] 11 - 15
Input voltage (mains - AC) [V] 230
Charging current [A] 0.1 - 6
Charging power [W] 80
Discharge current [A] 0.1 - 2
Discharge power [W] 10
Number of channels 1
NiCd [Art.] 1 - 15
NiMH [Art.] 1 - 15
Li-Pol [Art.] 1 - 6
Li-HV [Art.] 1 - 6
Li-Ion [Art.] 1 - 6
Li-Fe [Art.] 1 - 6
Balancer Yes
Balancer current [mA] 400
Length [mm] 144
Width [mm] 137
Height [mm] 40
Weight [g] 493

Recommended accessories