GTPower C6D Mini Charger AC / DC 10A 100W

The GTPower C6D 100W is a small, easy-to-use, easy to use universal mains charger for home charging of all types of batteries. The C6D Mini allows to charge and discharge common cell types (NiCd, NiMH, Li-Poly, Li-Ion, Li-Fe, LiHV, Pb), plus a built-in four-channel balancer that ensures very safe and comfortable charging of lithium batteries.
"Mains power 100-240 V / 50-60 Hz
"For charging and discharging 6-8 NiCd / NiMH cells, 2-4 Li-ion / Li-poly / Li-Fe / LiHV cells or 6-12 V lead-acid batteries
"Adjustable charging current (0.1 A - 10.0 A)
"Adjustable Discharge Current (0.1 A - 2.0 A)
"Max power to charge 100 W, to discharge 10 W
"Automatic charge and discharge mode for NiCd, NiMH with adjustable current limit
"Finish charging with delta-peak automatics for NiCd and NiMH batteries
"Lithium and Pb batteries are charged by constant current / constant voltage"
"Adjustable sensitivity delta-peak detection for NiCd and NiMH batteries
"Adjustable Charging and Discharge Voltage for lithium batteries
"Repeated cyclic operation charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
"Four charging modes for lithium batteries - normal charging, fast charging, with balancer charging and storage charging / discharging. The last two modes require connection of balancing kit service connector, in other modes it can charge with or without balancer.
"Stop charging when set time, charge or limit temperature is exceeded.
"Memory for 5 charge / discharge programs for each battery type.
"Measurement of the total voltage of the set and individual cells (for lithium batteries).
"Measurement of total internal resistance of a set and individual cells (for lithium batteries).
"Temperature sensor socket. < br /> "Output socket of the XT60 charger.
"Two-line backlit LCD display with simple a clear menu and parameter display during charging / discharging
"A number of warning text messages contribute to safe operation - incorrect input voltage, wrong wiring, inappropriate battery or battery condition, incorrect polarity at output
"Reverse polarity protection and short circuit on output.
"Compact plastic cabinet, small size
"Built - in fan for forced cooling
"Built - in power supply.
The charger is equipped with an XT60 output socket and a versatile JST-XH service connector, allowing to directly connect battery power cables and JST-XH 2-6S service connectors - if you are using XT60 and JST-XH connector kits, you can do without and adapters. To connect the service connectors of other systems, you can use standard Sky RC or RC System adapters to cut off the 5th and 6th channel output connector part .
To measure the temperature of the charged / discharged batteries, you can purchase a temperature sensor.
Note: The charger uses 2.40 V / cell to charge lead-acid batteries and is therefore suitable for charging conventional lead-acid batteries and gel batteries with a reversible valve . For charging gas-tight gel batteries that must not be charged more than 2.30 V / cell, not applicable.
The charger kit includes: charger GTPower C6D 100W charger, mains cable, instructions .

Parameters:

AC input voltage AC 100 ~ 240V
Charging power max .: 100W
Discharge Max: 10W
Charge current range: 0.1 ~ 10A
Discharge range: 0.1 ~ 2.0A
Charging modes :: LiPo / LiHv / LiFe / Lilon 2 ~ 4 cells
NiCd / NiMH 6 ~ 8 cells
Pb Battery Voltage 6V (3P) ~ 12V (6P)
Balance current: 300mA per cell
Dimensions 115 * 112 * 55 mm

Output Power Connector: XT60

XT60 / Dean-T cable included

Weight 302g